The hydrothermal carbonization (HTC) process that converts wet/dry biomass to hydrochars (for use as solid fuels or adsorbents) needs to be optimized. We investigated the interactive effects of feedstock type and HTC temperature on chemical, fuel, and surface properties of hydrochars produced from lignocellulosic (canola straw, sawdust and wheat straw) and non-lignocellulosic feedstocks (manure pellet) at 180, 240 and 300 °C. Increased HTC temperature decreased hydrochar yield and surface functional group abundance, but increased hydrochar thermal stability due to increased devolatilization and carbonization. Hydrochar surface area ranged from 1.76 to 30.59 mg, much lower than those of commercially available activated carbon. Lignocellulosic and non-lignocellulosic feedstocks were distinctly affected by HTC temperature due to variable carbonization from ashing. Hydrochars produced from lignocellulosic biomass at 240 and 300 °C resembled high-volatile bituminous coal. Hydrochars should be designed for specific applications such as fuels by selecting specific feedstock types and carbonization conditions.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.biortech.2021.124976 | DOI Listing |
Waste Manag
December 2024
Key Laboratory of Agro-Environment in Downstream of Yangtze Plain/Scientific Observing and Experimental Station of Arable Land Conservation (Jiangsu), Ministry of Agriculture and Rural Affairs, Institute of Agricultural Resources and Environment, Jiangsu Academy of Agricultural Sciences, Nanjing 210014, China. Electronic address:
J Hazard Mater
November 2024
Energy and Resources Institute, Charles Darwin University, Ellengowan Drive, Purple 12.01.08, Casuarina, NT 0810, Australia. Electronic address:
Contamination of chars with dioxin-like polychlorinated biphenyls (dl-PCB) significantly limits their use and hinders their deployment in the circular bioeconomy, specifically in applications that may lead to dietary exposure. Here, for the first time, we review the levels of contamination of chars produced from pyrolysis and hydrothermal carbonisation (HTC) with dl-PCB congeners. We conduct a detailed and critical examination of the role played by the processing parameters, such as temperature and residence time, and the reaction mechanisms, to detoxify the biomass under an oxygen-free atmosphere during its valorisation.
View Article and Find Full Text PDFHeliyon
December 2024
School of Chemical, Petroleum and Gas Engineering, Iran University of Science and Technology, Tehran, Iran.
In this study, modeling and optimization of Hydrothermal Carbonization (HTC) of Poultry litter were conducted to convert it into high-value materials. The aim was to understand the process and predict the effect of the influencing parameters on the product properties. The recovery of Inorganic Phosphorous (IP) and Carbon (C) was regarded as the model's response, although temperature and reaction time were thought to be important variables.
View Article and Find Full Text PDFJ Environ Manage
December 2024
Université Grenoble Alpes, CEA, LITEN, DTCH, Laboratoire Réacteurs et Procédés (LRP), F-38000, Grenoble, France. Electronic address:
With more than 10 million dry tons annually produced in the EU and a carbon content of approximately 30% db, sewage sludge (SS) can be a strategic source of biogenic carbon. However, the high moisture content and large amount of ash are strong barriers to sustainable valorisation. This study aims to assess the potential of hydrothermal carbonisation (HTC) as a sustainable alternative to sludge drying.
View Article and Find Full Text PDFJ Environ Manage
December 2024
Fujian Provincial Key Laboratory of Soil Environmental Health and Regulation, College of Resources and Environment, Fujian Agriculture and Forestry University, Fuzhou, 350002, China.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!