Zinc Manganate: Synthesis, Characterization, and Electrochemical Application toward Flufenamic Acid Detection.

The construction of novel electrocatalysts for efficient and economic electrochemical sensors is continuously a significant conceptual barrier for the point-of-care technology. Binary metal oxides with heterostructures have gained plenty of attention due to their promising physicochemical properties. Herein, we develop a rapid and sensitive electrochemical probe for the detection of flufenamic acid (FFA) by using a zinc manganate (ZnMnO)-modified electrode. The formation of ZnMnO was confirmed by various analytical techniques, such as X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, and field-emission scanning electron microscopy with energy dispersive X-ray spectroscopy and elemental mapping. The ZnMnO-based electrocatalyst, which was used for the electrochemical detection of FFA, shows better performance than the previously reported electrode materials. The ZnMnO assay shows a linear quantitative range from 0.05 to 116 μM with a limit of detection of 0.003 μM and sensitivity of 0.385 μA μM cm. Its good electrochemical performance can be ascribed to the large surface area, rapid charge mass transfer, copious active sites, and high carrier mobility. The electrochemical study displays that the fabricated ZnMnO-based sensor has the potential to be applied in the clinical analysis. This work constructs an advanced functional electrode material with a microscale architecture for the point-of-care technology.