AI Article Synopsis
Article Abstract
In this study, the effect of Ru-Mn bimetallic catalysts in combination with a zeolite support on the removal of toluene in the presence of ozone at room temperature was investigated. Desili-cated HZSM-5 (DZSM) was fabricated and applied as a Ru-Mn support for the removal of toluene (100 ppm) in the presence of ozone (1000 ppm) at room temperature. The surface area, pore volume, and average pore size of Ru-Mn with a DZSM support (RuMn/DZSM) were measured and compared with those of Ru-Mn/HZSM-5 (RuMn/HZSM). The pore size of RuMn/DZSM (69 Å) was much larger than that of RuMn/HZSM-5 (5.5 Å). In addition, the pore volumes of RuMn/DZSM and RuMn/HZSM were 0.64 and 0.25 cm³/g, respectively. Furthermore, the ratios of Mn³+/Mn⁴+ and O/O of RuMn/DZSM were larger than those of RuMn/HZSM-5. The removal efficiency of toluene of RuMn/DZSM was higher than that of RuMn/HZSM due to its larger pore volume, pore size, and the increased ratios of Mn³+/Mn⁴+ and O/O.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1166/jnn.2021.19194 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of Spray-Dried Micelles, Liposomes, and Solid Lipid Nanoparticles for Enhanced Stability.
Pharmaceutics
January 2025
Department of Pharmaceutics and Medicinal Chemistry, University of the Pacific, Stockton, CA 95211, USA.
Micelles, liposomes, and solid lipid nanoparticles (SLNs) are promising drug delivery vehicles; however, poor aqueous stability requires post-processing drying methods for maintaining long-term stability. The objective of this study was to compare the potential of lipid-based micelles, liposomes, and SLNs for producing stable re-dispersible spray-dried powders with trehalose or a combination of trehalose and L-leucine. This study provides novel insights into the implementation of spray drying as a technique to enhance long-term stability for these lipid-based nanocarriers.
View Article and Find Full Text PDFEnteric Coated Pellets with Lactoferrin for Oral Delivery: Improved Shelf Life of the Product.
Pharmaceutics
December 2024
Faculty of Pharmacy, University of Ljubljana, Aškerčeva Cesta 7, 1000 Ljubljana, Slovenia.
Background/objectives: Lactoferrin (Lf), a multifunctional iron-binding protein, has considerable potential for use as an active ingredient in food supplements due to its numerous positive effects on health. As Lf is prone to degradation, we aimed to develop a formulation that would ensure sufficient stability of Lf in the gastrointestinal tract and during product storage.
Methods: A simple, efficient, and well-established technology that has potential for industrial production was used for the double-coating of neutral pellet cores with an Lf layer and a protective enteric coating.
Bioadhesive Chitosan Films Loading Curcumin for Safe and Effective Skin Cancer Topical Treatment.
Pharmaceutics
December 2024
Laboratory of Food, Drugs, and Cosmetics (LTMAC), University of Brasilia, Brasília 70910-900, Brazil.
: This study aimed to evaluate the safety and efficacy of chitosan-based bioadhesive films for facilitating the topical delivery of curcumin in skin cancer treatment, addressing the pharmacokinetic limitations associated with oral administration. : The films, which incorporated curcumin, were formulated using varying proportions of chitosan, polyvinyl alcohol, Poloxamer 407, and propylene glycol. These films were assessed for stability, drug release, in vitro skin permeation, cell viability (with and without radiotherapy), and skin irritation.
View Article and Find Full Text PDFThermosetting Resin for Plug and Abandonment of Oil Wells with Reduced Environmental Impact.
Polymers (Basel)
January 2025
Danish Polymer Centre, Department of Chemical and Biochemical Engineering, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark.
Plug and abandonment of offshore oil wells is a costly and time-consuming process, yet it is necessary for the ever-increasing number of mature fields in the region of the Danish North Sea, as well as globally. Current practices ensuring durable solutions for the complete zonal isolation of oil wells have a large environmental impact. This paper proposes a novel resin that could be mixed on the platform and pumped into the tubing in a liquid state.
View Article and Find Full Text PDFStudy on the Improvement Effect of Polypropylene Fiber on the Mechanical Properties and Freeze-Thaw Degradation Performance of High Fly Ash Content Alkali-Activated Fly Ash Slag Concrete.
Polymers (Basel)
January 2025
School of Civil Engineering and Transportation, Northeast Forestry University, Harbin 150040, China.
This article systematically investigated the improvement effect of polypropylene fiber (PPF) on the mechanical and freeze-thaw properties of alkali-activated fly ash slag concrete (AAFSC) with high fly ash content and cured at room temperature. Fly ash and slag were used as precursors, with fly ash accounting for 80% of the total mass. A mixed solution of sodium hydroxide and sodium silicate was used as alkali activator, and short-cut PPF was added to improve the performance of AAFSC.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!