Introduction: The objective of this study was to evaluate in vitro and in vivo bacterial endotoxin (LPS) adhesion in polyurethane and silicone esthetic elastomeric orthodontic ligatures. The null hypotheses tested were: (1) there is no LPS adhesion in esthetic elastomeric orthodontic ligatures; and (2) there is no difference in the LPS adhesion between different brands of these ligatures.
Methods: For the in vitro study, 4 types of esthetic elastomeric ligatures were used (Sani-Ties and Sili-Ties [Dentsply GAC, Islandia, NY;] and Mini Single Case Ligature Stick and Synergy low-friction ligatures [Rocky Mountain Orthodontics, Denver, Colo]), contaminated or not with endotoxin solution. Replicas of twisted wire and cast stainless steel ligatures were used as control. For the in vivo study, 10 male and 10 female patients, aged 15-30 years, received the same 4 types of ligatures, 1 of each inserted in the maxillary and mandibular canines, randomly. Twenty-one days later, the ligatures were removed, and endotoxin quantification was performed using the Limulus amebocyte lysate test. Data were analyzed (α = 0.05) using the Kruskal-Wallis test and Dunn's posttest or analysis of variance and Tukey's posttest.
Results: GAC silicone group had the lowest median contamination (1.15 endotoxin units/mL; P <0.0001) in vitro. In the in vivo study, the GAC silicone group had the lowest mean contamination (0.577 endotoxin units/mL; P <0.001). In both studies, the other groups did not present a significant difference when compared with each other (P >0.05).
Conclusions: LPS exhibited an affinity for all the tested polyurethane and silicone elastomeric ligatures. GAC silicone ligatures presented with lower amounts of LPS attached to their surfaces. Thus, both null hypotheses were rejected.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.ajodo.2020.02.015 | DOI Listing |
J Esthet Restor Dent
September 2024
Department of Developmental Biology, Harvard School of Dental Medicine, Boston, USA.
Background: Contemporary fixed orthodontic appliances are shifting from non-customized pre-adjusted appliances to custom-designed and printed appliances with novel digital setup systems. We are one step closer to precision dentistry and orthodontics using personalized mechanics and custom appliances. However, despite the evidential enhancement and other improvements to fixed appliances, tooth movement is still limited to five degrees of freedom.
View Article and Find Full Text PDFJ Prosthodont
March 2024
Department of Reconstructive Dentistry and Gerodontology, School of Dental Medicine, University of Bern, Bern, Switzerland.
Computer-aided design and computer-aided manufacturing systems enable digital designing and 3-dimensional (3D) printing of definitive casts with removable dies. However, the fit of the removable dies should be without interferences for their accurate positioning in the cast. Given that the accuracy of additive manufacturing depends on design- and manufacturing-related factors, verifying the accuracy of the position of 3D-printed removable dies in their cast is essential to fabricate positionally accurate definitive prostheses, which would enable minimal or no laboratory and clinical adjustments.
View Article and Find Full Text PDFJ Orofac Orthop
August 2024
Department of Pediatric Clinics, School of Dentistry of Ribeirão Preto, São Paulo University, Avenida do Cafe, s/no, Ribeirão Preto, SP, Brazil.
Objective: The aim of this study is to assess the microbial contamination of three different brands of esthetic elastomeric ligatures.
Materials And Methods: Different brands of esthetic ligatures (Unistick Pearl [American Orthodontics, Sheboygan, WI, USA], Power Sticks Pearl [Ortho Technology, Tampa, FL, USA], and Ease [Obscure, 3M Unitek, Monrovia, CA, USA]) were randomly assigned to permanent canines of 25 patients (aged 11-18 years) undergoing corrective orthodontic treatment. After 30 days, the ligatures were removed, processed, and the biofilm composition was analyzed by checkerboard DNA-DNA hybridization for 40 bacterial species.
Adv Skin Wound Care
September 2023
At Universitair Ziekenhuis Brussels, Belgium, Ellen Peters, MD, is Resident, Plastic, Reconstructive, and Aesthetic Surgery; Valerie Hanssens, MSc, is Nurse Specialist Wound Care; Melissa De Henau, MD, is Medical Doctor; Yamina Dupont, MD, is Resident, Plastic, Reconstructive, and Aesthetic Surgery; Jeannine Spinnael, BSN, is Nurse Specialist Wound Care; Gabriele Giunta, MD, Assaf Zeltzer, MD, PhD, and Randy De Baerdemaeker, MD, are Staff Members, Plastic, Reconstructive, and Aesthetic Surgery; and Moustapha Hamdi, MD, PhD, is Chief, Department of Plastic, Reconstructive, and Aesthetic Surgery. The authors have disclosed no financial relationships related to this article. Submitted February 8, 2022; accepted in revised form October 21, 2022; Published ahead of print July 31, 2023.
Split-thickness skin grafting (STSG) is a common surgical procedure to manage acute and chronic wounds. A plethora of dressings exists to treat STSG donor site wounds (DSWs). Recently, a new elastomeric skin protectant was adopted (Cavilon Advanced Skin Protectant; 3M) in the treatment of incontinence-associated dermatitis.
View Article and Find Full Text PDFThis clinical report details the successful rehabilitation of a 63-year-old male patient with severe tooth wear, a reduced vertical dimension of occlusion, and esthetic concerns. The Hobo twin-stage procedure addressed these issues while improving the patient's oral health and quality of life. After ensuring adequate oral hygiene, the treatment began with scaling and root planning, followed by diagnostic impressions.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!