Electrically conductive membranes are a promising avenue to reduce water treatment costs due to their ability to minimize the detrimental impact of fouling, to degrade contaminants, and to provide other additional benefits during filtration. Here, we demonstrate the facile and low-cost fabrication of electrically conductive membranes using laser-reduced graphene oxide (GO). In this method, GO is filtered onto a poly(ether sulfone) membrane support before being pyrolyzed via laser into a conductive film. Laser-reduced GO composite membranes are shown to be equally as permeable to water as the underlying membrane support and possess sheet resistances as low as 209 Ω/□. Application of the laser-reduced GO membranes is demonstrated through greater than 97% removal of a surrogate water contaminant, 25 μM methyl orange dye, with an 8 V applied potential. Furthermore, we show that laser-reduced GO membranes can be further tuned with the addition of -phenylenediamine binding molecules to decrease the sheet resistance to 54 Ω/□.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acs.nanolett.0c04512 | DOI Listing |
Laser reduction of polymers has recently been explored to rapidly and inexpensively synthesize high-quality graphitic and carbonaceous materials. However, in past work, laser-induced graphene has been restricted to semiaromatic polymers and graphene oxide; in particular, poly(acrylonitrile) (PAN) is claimed to be a polymer that cannot be laser-reduced successfully to form electrochemically active material. In this work, three strategies to surmount this barrier are employed: (1) thermal stabilization of PAN to increase its sp content for improved laser processability, (2) prelaser treatment microstructuring to reduce the effects of thermal stresses, and (3) Bayesian optimization to search the parameter space of laser processing to improve performance and discover morphologies.
View Article and Find Full Text PDFNano Lett
March 2021
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States.
Electrically conductive membranes are a promising avenue to reduce water treatment costs due to their ability to minimize the detrimental impact of fouling, to degrade contaminants, and to provide other additional benefits during filtration. Here, we demonstrate the facile and low-cost fabrication of electrically conductive membranes using laser-reduced graphene oxide (GO). In this method, GO is filtered onto a poly(ether sulfone) membrane support before being pyrolyzed via laser into a conductive film.
View Article and Find Full Text PDFLasers Med Sci
November 2012
Department of Biosciences and Oral Diagnosis, School of Dentistry of São José dos Campos, Univ Estadual Paulista, Engenheiro Francisco José Longo 777, São Dimas, São José dos Campos, SP, Brazil.
The biofilms formed by opportunistic yeasts serve as a persistent reservoir of infection and impair the treatment of fungal diseases. The aim of this study was to evaluate photodynamic inactivation (PDI) of biofilms formed by Candida spp. and the emerging pathogens Trichosporon mucoides and Kodamaea ohmeri by a cationic nanoemulsion of zinc 2,9,16,23-tetrakis(phenylthio)-29H,31H-phthalocyanine (ZnPc).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!