In this paper, the structural and optical properties of ZnO-SiO-based ceramics fabricated from oil palm empty fruit bunch (OPEFB) were investigated. The OPEFB waste was burned at 600, 700 and 800 °C to form palm ash and was then treated with sulfuric acid to extract silica from the ash. X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyses confirmed the existence of SiO in the sample. Field emission scanning electron microscopy (FESEM) showed that the particles displayed an irregular shape and became finer after leaching. Then, the solid-state method was used to produce the ZnO-SiO composite and the samples were sintered at 600, 800, 1000, 1200 and 1400 °C. The XRD peaks of the ZnSiO showed high intensity, which indicated high crystallinity of the composite. FESEM images proved that the grain boundaries were larger as the temperature increased. Upon obtaining the absorbance spectrum from ultraviolet-visible (UV-Vis) spectroscopy, the energy band gaps obtained were 3.192, 3.202 and 3.214 eV at room temperature, 600 and 800 °C, respectively, and decreased to 3.127, 2.854 and 2.609 eV at 1000, 1200 and 1400 °C, respectively. OPEFB shows high potential as a silica source in producing promising optical materials.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7922681 | PMC |
http://dx.doi.org/10.3390/molecules26041061 | DOI Listing |
Polymers (Basel)
January 2025
Sustainable Polymer & Innovative Composite Materials Research Group, Department of Chemistry, Faculty of Science, King Mongkut's University of Technology Thonburi, Bangkok 10140, Thailand.
This study investigates the synergistic effects of incorporating modified zinc oxide-silica (ZnO-SiO) into tire waste (TW) and epoxidized natural rubber (ENR) blends, with a focus on crosslinking dynamics, mechanical reinforcement, and antibacterial activity. The addition of ZnO-SiO significantly enhanced crosslink density, as evidenced by increased torque and accelerated cure rates. An optimal concentration of 10 phr was found to yield the highest performance.
View Article and Find Full Text PDFSensors (Basel)
December 2024
College of Physics and Electronic Engineering, Hainan Normal University, Haikou 571158, China.
This study explores the fabrication of ZnO-SiO composite films on silicon substrates via a sol-gel method combined with spin-coating, followed by annealing at various temperatures. The research aims to enhance the UV emission and photoelectric properties of the films. XRD showed that the prepared ZnO sample has a hexagonal structure.
View Article and Find Full Text PDFAdv Sci (Weinh)
December 2024
School of Physics and Microelectronics, Zhengzhou University, Zhengzhou, 450001, China.
As an important candidate for rechargeable energy storage devices, the large-scale development of aqueous zinc ion batteries has been hindered by hydrogen evolution and uncontrollable dendrites of metal anodes. A novel ZnO-SiO composite interface phase (Zn@ZSCP) with a double protective effect based on in situ synthesis by hydrothermal method is used to improve these difficulties. The hydrophilic SiO layer is beneficial to the dissolution of hydrated zinc ions and reduces the nucleation barrier during zinc deposition, while the stable ZnO layer helps to adjust the electric field distribution on the surface of the metal anode to further induce uniform zinc nucleation.
View Article and Find Full Text PDFLangmuir
December 2024
School of Chemistry and Chemical Engineering, Guizhou University, Guiyang 550025, China.
The practical applications of SiO anode material are limited by large volume changes and poor electronic conductivity. To reduce the effects of these problems, a carbon-coated coaxial cable-like ZnO@SiO@C composite material was prepared. ZnO has a certian electronic conductivity and an electrochemical activity, and the carbon layer can alleviate the volume variation of SiO, effectively improving the electronic conductivity and structural stability.
View Article and Find Full Text PDFSensors (Basel)
June 2024
Laboratory of Sensors, Biosensors and Advanced Materials, Faculty of Health Sciences, University of La Laguna, Campus de Ofra s/n, 38071 La Laguna, Spain.
Pollution by heavy metal ions has a serious impact on human health and the environment, which is why the monitoring of heavy metal ions is of great practical importance. In this work, we describe the development of an electrochemical sensor for the detection of cadmium (Cd) involving the doping of porous SiO spheres with ZnO nanoparticles. Zinc oxide is chosen as the central dopant in the composite material to increase the conductivity and thus improve the electrochemical detection of Cd ions with the SiO spheres.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!