Sustainable Esterification of a Soda Lignin with Phloretic Acid.

Polymers (Basel)

Luxembourg Institute of Science and Technology, Materials Research and Technology Department, 5 Avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg.

Published: February 2021

In this work, a sustainable chemical process was developed through the Fischer esterification of Protobind lignin, a wheat straw soda lignin, and phloretic acid, a naturally occurring phenolic acid. It aimed at increasing the reactivity of lignin by enhancing the number of unsubstituted phenolic groups via a green and solvent-free chemical pathway. The structural features of the technical and esterified lignins were characterized by complementary spectroscopic techniques, including H, C, P, and two-dimensional analysis. A substantial increase in -hydroxyphenyl units was measured (+64%, corresponding to an increase of +1.3 mmol g). A full factorial design of the experiment was employed to quantify the impact of critical variables on the conversion yield. The subsequent statistical analysis suggested that the initial molar ratio between the two precursors was the factor predominating the yield of the reaction. Hansen solubility parameters of both the technical and esterified lignins were determined by solubility assays in multiple solvents, evidencing their high solubility in common organic solvents. The esterified lignin demonstrated a better thermal stability as the onset of thermal degradation shifted from 157 to 220 °C, concomitantly to the shift of the glass transition from 92 to 112 °C. In conclusion, the esterified lignin showed potential for being used as sustainable building blocks for composite and thermoset applications.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7924587PMC
http://dx.doi.org/10.3390/polym13040637DOI Listing

Publication Analysis

Top Keywords

soda lignin
8
lignin phloretic
8
phloretic acid
8
technical esterified
8
esterified lignins
8
esterified lignin
8
lignin
6
sustainable esterification
4
esterification soda
4
acid work
4

Similar Publications

The state-of-the-art, simple and scalable methods for lignin micro-/nano-particles recovery from agricultural biomasses were evaluated in this review. Being non-wood biomasses, these materials can be easily fibrillated, supporting the usage of mild soda or organic solvent pretreatment. Different approaches in particle recovery were compared to conclude that the bottom-up approach facilitates smaller particles towards the nano-size range whereas mechanical treatment can act as a supporting method to increase uniformity and reduce particle sizes after bottom-up precipitation.

View Article and Find Full Text PDF

This study explores the innovative potential of native lignin as a sustainable biopolyol for synthesizing polyurethane aerogels with variable microstructures, significant specific surface areas, and high mechanical stability. Three types of lignin-Organosolv, Aquasolv, and Soda lignin-were evaluated based on structural characteristics, Klason lignin content, and particle size, with Organosolv lignin being identified as the optimal candidate. The microstructure of lignin polyurethane samples was adjustable by solvent choice: Gelation in DMSO and pyridine, with high affinity to lignin, resulted in dense materials with low specific surface areas, while the use of the low-affinity solvent e.

View Article and Find Full Text PDF

Dataset of some added-lignin thermoformed pulps.

Data Brief

December 2024

RISE PFI AS, Høgskoleringen 6B, 7491 Trondheim, Norway.

This data article summarizes the material properties of some added-lignin thermoformed pulps (ALTPs). This type of molded pulp is particularly suited for replacing plastics in environments, where moisture is encountered, as the lignin reduces the transport and adsorption of water. The dataset was measured on wet formed substrates with either softwood chemi-thermomechanical pulp (CTMP) or northern bleached softwood Kraft pulp (NBSK).

View Article and Find Full Text PDF

The development of eco-friendly wood adhesives have gained more interest among adhesives industries due to the concerns about using carcinogenic formaldehyde and petroleum-based phenol in commercially available adhesives. Therefore, many studies have been done by using lignin to partially replace phenol and completely substitute formaldehyde with non-toxic glyoxal in a wood adhesive formulation. This study focused on using different percentages of lignin substitution (10 %, 30 % and 50 wt%) of alkaline and organosolv coconut husk lignin into soda lignin-phenol-glyoxal (SLPG), Kraft lignin-phenol-glyoxal (KLPG) and organosolv lignin-phenol-glyoxal (OLPG) adhesives.

View Article and Find Full Text PDF

The widespread development of lignin valorization is hindered by a number of challenges. In particular, efficient valorization necessitates comprehensive characterization of initial lignins. In this work, the structural features of lignins from birch wood (Bétula péndula), obtained by various methods of hard and mild fractionation of biomass: hydrolysis (Hyd-L), kraft (Kraft-L), soda (Soda-L), and soda-ethanol (SodaEt-L) processes, as well as organosolv processes with dioxane (MWL, DL) and dimethyl sulfoxide (DMSO-L) have been comprehensively studied.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!