Comparison of the Torsional Resistance of 4 Different Glide Path Instruments.

Introduction: The present study aimed to compare the torsional strength of the initial files of the Mtwo (VDW, Munich, Germany) and novel Rotate systems (VDW, Munich, Germany) with the ProGlider (Dentsply Sirona, Ballaigues, Switzerland) and R-Pilot (VDW) glide path instruments.

Methods: The Mtwo (10/.04), ProGlider (16/.02), R-Pilot (12.5/.04), and Rotate (15/.04) glide path files were compared regarding their torsional strength, which was tested using a specially designed test device (N = 20). The data obtained were statistically analyzed at 5% significance level using 1-way analysis of variance and the post hoc Tukey test. The fragment surfaces and separated instruments were examined with ×50, ×100, and ×1000 magnification under a scanning electron microscope.

Results: The R-Pilot group showed the highest torsional strength value among all groups (P < .05), whereas there was no significant difference between the torsional strength values of the Mtwo and ProGlider groups (P > .05). The Rotate group had the lowest torsional strength among all groups (P < .05). The Mtwo group showed the lowest angle of rotation among all groups (P < .05).

Conclusions: Although the R-Pilot glide path file exhibited the highest torsional strength in all groups, Rotate showed the highest angle of rotation. Differences in torsional resistance of the instruments may be associated with their manufacturing methods and design features.