Heavy metal solubilisation during the hydrothermal treatment of sludge.

J Environ Manage

Department of Chemical and Environmental Engineering, University of Oviedo, 33071, Oviedo, Spain. Electronic address:

Published: May 2021

The present study analyses the combined effects of temperature (from 160 to 200 °C), and, for the first time ever, type of atmosphere (oxidising or inert) and pressure (from 60 to 100 bar) on the solubilisation of heavy metals during the hydrothermal treatment of wet no-diluted sewage sludge. Results revealed that Cd, Pb, Al and Fe were hardly affected by neither the atmosphere nor temperature, remained almost completely in the solid phase during all the hydrothermal treatments tested; while Cr, Ni, Cu and Zn were partially solubilised, being this solubilisation favoured by the presence of an oxidising atmosphere. In contrast, initial dissolved Hg was partially precipitated under both types of atmosphere, although it was re-dissolved after 30 min under an inert atmosphere. Regarding the working conditions, the highest temperature (200 °C) caused the greatest metal immobilisation, whereas the range of pressures tested barely had any effect on it. Concerning the reaction time, the lowest concentration of metals in the liquid fraction of the hydrolysed sludge was obtained during the initial 30 min of treatment.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jenvman.2021.112120DOI Listing

Publication Analysis

Top Keywords

hydrothermal treatment
8
atmosphere
5
heavy metal
4
metal solubilisation
4
solubilisation hydrothermal
4
treatment sludge
4
sludge study
4
study analyses
4
analyses combined
4
combined effects
4

Similar Publications

Background: Lenvatinib is an oral tyrosine kinase inhibitor that selectively inhib-its receptors involved in tumor angiogenesis and tumor growth. It is an emerging first-line treatment agent for hepatocellular carcinoma (HCC). However, there is no intravenous ad-ministration of Lenvatinib.

View Article and Find Full Text PDF

The hydrothermal synthesis is presented of copper-doped carbon dots (Cu-CDs) from citric acid, urea, and copper chloride, resulting in blue-fluorescent particles with stable emission at 438 nm when excited at 340 nm. Through comprehensive spectroscopic and microscopic characterization (FTIR, XPS, UV, and HRTEM), the Cu-CDs demonstrated remarkable stability across varying pH levels, ionic strengths, temperatures, and UV exposure. Notably, Cu-CDs exhibit ultra-sensitive and selective detection of hexavalent chromium [Cr(VI)] ions in aqueous environments driven by fluorescence quenching.

View Article and Find Full Text PDF

The rapid growth in the global population has led to increased environmental pollution and energy demands, exacerbating the issue of environmental contamination. This contamination is significantly impacted by various types of pesticides found in water sources, which pose serious health risks to humans, animals, and aquatic ecosystems. In response, extensive research into water treatment technologies has been conducted, focusing on efficient methods to remove these pollutants, with advanced oxidation processes and the utilization of tungsten trioxide (WO) as a photocatalyst showing promising results.

View Article and Find Full Text PDF

Sub-cellular organelle anomalies are frequently observed in diseases such as cancer. Early and precise diagnosis of these alterations can be crucial for patient outcomes. However, current diagnostic tools using conventional organic dyes or metal quantum dots face limitations, including poor biocompatibility, stringent storage conditions, limited solubility in aqueous media, and slow staining speeds.

View Article and Find Full Text PDF

Hydroxyapatite nanoparticles (HANPs) are becoming increasingly crucial in dental implant applications as they are highly compatible with biological systems, actively support biological processes, and closely resemble bone minerals. This review covers the latest progress in how HANPs are made, studied, and used in dentistry. It looks at critical methods for creating HANPs, such as sol-gel, microwave hydrothermal synthesis, and biomimetic approaches, and how they affect the particles' size, structure, and activity.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!