A nonwoven fiber made of polylactide/natural rubber with a rubber content from 0 to 15 wt.% was obtained by electrospinning from a solution. The water sorption test showed that the addition of natural rubber into the polylactide matrix did not significantly affect the degree of water absorption of the fibers, which was in the range of 48.9-50.6%. The melt flow rate only increased by 0.5 g/10 min at a content of 15 wt.% natural rubber. The thermal characteristics after 120 days of degradation in distilled water and UV irradiation (50 h) at a wavelength of 365 nm were determined using differential scanning calorimetry. Changes in the values of the phase transition temperatures and the degree of crystallinity were determined. It was determined that the fiber samples from all compositions retained the propensity for photo- and hydrolytic degradation.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7866982 | PMC |
| http://dx.doi.org/10.3390/polym13030461 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Contribution of Nuclear Fragmentation to Dose and RBE in Carbon-Ion Radiotherapy.
Radiat Res
January 2025
Department of Radiation Oncology, Mayo Clinic, Rochester, Minnesota.
Variable relative biological effectiveness (RBE) of carbon radiotherapy may be calculated using several models, including the microdosimetric kinetic model (MKM), stochastic MKM (SMKM), repair-misrepair-fixation (RMF) model, and local effect model I (LEM), which have not been thoroughly compared. In this work, we compared how these four models handle carbon beam fragmentation, providing insight into where model differences arise. Monoenergetic and spread-out Bragg peak carbon beams incident on a water phantom were simulated using Monte Carlo.
View Article and Find Full Text PDFWater-Resistant Poly(ethylene oxide) Electrospun Membranes Enabled by In Situ UV-Cross-Linking for Efficient Daytime Radiative Cooling.
Molecules
January 2025
College of Textile and Clothing Engineering, Soochow University, Suzhou 215123, China.
Daytime radiative cooling, based on selective infrared emissions through atmospheric transparency windows to outer space and the reflection of solar irradiance, is a zero-energy and environmentally friendly cooling technology. Poly(ethylene oxide) (PEO) electrospun membranes have both selective mid-infrared emissions and effective sunlight reflection, inducing excellent daytime radiative cooling performance. However, PEO is highly water soluble, which makes electrospun PEO membranes unable to cope with rainy conditions when used for outdoor daytime radiative cooling.
View Article and Find Full Text PDFSelf-Assembly Strategy for Synthesis of WO@TCN Heterojunction: Efficient for Photocatalytic Degradation and Hydrogen Production via Water Splitting.
Molecules
January 2025
Department of Applied Chemistry, College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
Herein, a WO@TCN photocatalyst was successfully synthesized using a self-assembly method, which demonstrated effectiveness in degrading organic dyestuffs and photocatalytic evolution of H. The synergistic effect between WO and TCN, along with the porous structure of TCN, facilitated the formation of a heterojunction that promoted the absorption of visible light, accelerated the interfacial charge transfer, and inhibited the recombination of photogenerated electron-hole pairs. This led to excellent photocatalytic performance of 3%WO@TCN in degrading TC and catalyzing H evolution from water splitting under visible-light irradiation.
View Article and Find Full Text PDFElectron Push-Pull Effect of Benzotrithiophene-Based Covalent Organic Frameworks on the Photocatalytic Degradation of Pharmaceuticals and Personal Care Products.
Molecules
January 2025
Yunnan Key Laboratory of Metal-Organic Molecular Materials and Device, Kunming University, Kunming 650214, China.
A covalent organic framework (COF) has emerged as a promising photocatalyst for the removal of pharmaceutical and personal care product (PPCP) contaminants; however, high-performance COF photocatalysts are still scarce. In this study, three COF photocatalysts were successfully synthesized by the condensation of benzo[1,2-b:3,4-b':5,6-b'']trithiophene-2,5,8-tricarbaldehyde (BTT) with 4,4',4''-(1,3,5-triazine-2,4,6-triyl)trianiline (TAPT), 1,3,5-Tris(4-aminophenyl)benzene (TAPB), and 4,4',4''-nitrilotris(benzenamine) (TAPA), namely, BTT-TAPA, BTT-TAPB, and BTT-TAPT, respectively. The surface areas of BTT-TAPA, BTT-TAPB, and BTT-TAPT were found to be 800.
View Article and Find Full Text PDFSynthesis of Resorcinol and Chlorophenol from Irradiation of 1,3-Dichlorobenzene in a Water Ice Environment by Low-Energy Electrons.
Int J Mol Sci
January 2025
Faculty of Sciences, Siedlce University, 3 Maja 54, 08-110 Siedlce, Poland.
Dichlorobenzene is beneficial to industries, however, the release of this compound into the environment causes significant damage to ecosystems and human health, as it exhibits resistance to biodegradation. Here, we show that chlorophenol and resorcinol are synthesized from 1,3-dichlorobenzene in a water ice environment (1) directly on a poly-crystalline gold surface and (2) after low-energy (<12 eV) electron irradiation of admixture films. For the latter, at energies below 5.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!