Purpose: To evaluate the 2-year performance of definitive implant- or tooth-supported three-unit fixed dental prostheses made of zirconia-reinforced lithium silicate placed to restore premolars and molars in clinical cases of partial edentulism.
Materials And Methods: All patients received a three-unit fixed restoration made of monolithic, hot-pressed, zirconia-reinforced lithium silicate glass-ceramic. The restoration was cemented to two natural teeth or attached to two 3.5- or 4.5-mm-diameter square threaded, grit-blasted, acid-etched integrated implants with a Morse taper connection. Peri-implant pocket depth and bone and soft tissue remodeling were recorded for 2 years at each follow-up visit. Esthetic, functional, and biologic United States Public Health Services (USPHS) parameters modified by the World Dental Federation study design were assessed yearly until the final follow-up appointment. At the time of placement of the definitive restorations and at the 2-year follow-up visit, the opposing dentitions were identified by type of restoration and supporting structures.
Results: A total of 100 patients were consecutively enrolled in the period between June 2016 and July 2017, and 50 patients each received an implant-supported restoration (Group A) or a tooth-supported restoration (Group B). One (2%) of the 50 implant-supported prostheses fractured after 21 months of function. None of the other prostheses failed or became loose or detached. No significant differences involving probing levels or bone and soft tissue remodeling were found between the follow-up times. No cases of inflammation or infection of the mucosal cuff around the neck of the implants were recorded. The most common issue occurred immediately after placement of the prosthesis, when 3 patients (6%) from Group A and 4 patients (8%) from Group B asked for a modification of tooth shade.
Conclusion: Implant-supported or tooth-supported three-unit fixed dental prostheses made of zirconia-reinforced lithium silicate can be used to successfully restore cases of posterior partial edentulism. The 2-year results of this report will be studied more in depth in ongoing long-term research.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.11607/ijp.6924 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fracture resistance and marginal fit of three different overlay designs using advanced zirconia-reinforced lithium disilicate CAD/CAM material.
BMC Oral Health
January 2025
Department of Conservative Dentistry, Faculty of Dentistry, Alexandria University, Alexandria, Egypt.
Background: Conservative dentistry introduced modern restoration designs, contributing to the greater use of partial-coverage ceramic restorations. New strong bondable ceramic materials made fabricating partial coverage ceramic restorations easier to restore the badly destructed teeth.
Aim Of The Study: This study investigated the impact of three distinct overlay preparation designs on the marginal fit (both before and after thermal aging) and the fracture resistance of overlay restorations fabricated using advanced zirconia-reinforced lithium disilicate (ALD) CAD/CAM glass-ceramic blocks.
Determination of streptococcus mutans retention in acidic and neutral pH artificial saliva environment of all-ceramic materials with different surface treatment.
BMC Oral Health
January 2025
Department of Basic Medical Science, Faculty of Medicine, Yozgat Bozok University, Yozgat, 66100, Türkiye, Turkey.
Background: Although surface finishing processes are effective against Streptococcus mutans biofilm, the mechanism of action of saliva with different acidity values has not been studied in detail. This study aims to produce four different all-ceramic materials in a single session with CAD/CAM devices and apply two different surface finishing processes, glazing and polishing, and then determine the retention of Streptococcus mutants on the surfaces of the materials in saliva with varying levels of acidity.
Methods: Zirconia-reinforced lithium silicate (Vita Suprinity, Vita Zahnfabrik, Bad Saöckingen, Germany), monochromatic feldspar (Vitablocs Mark 2, Vita Zahnfabrik, Bad Saöckingen, Germany), leucite glass ceramic (IPS Empress CAD, Ivoclar Vivadent, Liechtenstein), and monolithic zirconia (Incoris TZI (Cerec) Sirona, Germany) were used in the study.
Purpose: The study aims to produce CAD-CAM reference samples for shade communication milled from the material of the restoration zirconia (ZrO2) and zirconia-reinforced lithium silicate (ZLS) and evaluate the color difference with the corresponding conventional Vita Classical (VC) shade tab. Furthermore, it aims to verify the color consistency of the materials.
Materials And Methods: Five-five samples were milled out of ZrO2 and ZLS in five different colors and their color parameters were compared with the corresponding VC tabs both visually and digitally.
Effect of aging on the translucency of lithium disilicate and zirconia reinforced lithium silicate ceramics: An study.
Heliyon
December 2024
Prosthodontic Department, College of Medicine and Dentistry, Riyadh Elm University, Riyadh, Saudi Arabia.
Background: Translucency of dental ceramics have great impact on the esthetic and success of dental restorations. The goal of the study is to investigate the effect of the aging process on the translucency of zirconia-reinforced lithium silicate ceramic material, and lithium disilicate ceramic material made using CAD/CAM and press processes.
Methods: Thirty disc-shaped specimens with 0.
Margin quality, homogeneity, and internal porosity assessment of experimental short fiber-reinforced CAD/CAM composite.
J Mech Behav Biomed Mater
December 2024
Department of Biomaterials Science and Turku Clinical Biomaterial Center -TCBC, Institute of Dentistry, University of Turku, Finland; Research Development and Production Department, Stick Tech Ltd-Member of GC Group, Turku, Finland.
Objectives: The aim of this study was to evaluate the margin quality of anterior crowns made of experimental short fiber-reinforced CAD/CAM composite (SFRC CAD) block before and after cyclic fatigue aging. Moreover, to investigate the microstructure, homogeneity, and porosity of the SFRC CAD compared with other commercial CAD/CAM materials.
Methods: 40 anterior crowns were milled from five CAD/CAM blocks divided into five groups (n = 8/group).
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!