AI Article Synopsis
Article Abstract
Holographic sensors are two-dimensional (2D) photonic crystals that diffract narrow-band light in the visible spectrum to quantify analytes in aqueous solutions. Here, a holographic fabrication setup was developed to produce holographic sensors through a doubly polymerization system of a poly-2-hydroxyethyl methacrylate hydrogel film using a pulsed Nd:YAG laser (λ = 355 nm, 5 ns, 100 mJ). Wavelength shifts of holographic Bragg peak in response to alcohol species (0-100 vol %) were characterized. Diffraction spectra showed that the holographic sensors could be used for short-chain alcohols at concentrations up to 60 vol %. The reversibility of the sensor was demonstrated, exhibiting a response time of 7.5 min for signal saturation. After 30 cycles, the Bragg peak and color remained the same in both 20 and 60 vol %. The fabrication parameters were simulated in MATLAB using a 2D finite-difference time-domain algorithm to model the interference pattern and energy flux profile of laser beam recording in the hydrogel medium. This work demonstrates a particle-free holographic sensor that offers continuous, reversible, and rapid colorimetric readouts for the real-time quantification of alcohols.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acssensors.0c02109 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Unleashing the Potential of Pre-Trained Diffusion Models for Generalizable Person Re-Identification.
Sensors (Basel)
January 2025
College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou 310027, China.
Domain-generalizable re-identification (DG Re-ID) aims to train a model on one or more source domains and evaluate its performance on unseen target domains, a task that has attracted growing attention due to its practical relevance. While numerous methods have been proposed, most rely on discriminative or contrastive learning frameworks to learn generalizable feature representations. However, these approaches often fail to mitigate shortcut learning, leading to suboptimal performance.
View Article and Find Full Text PDFNondestructive Mechanical Characterization of Bioengineered Tissues by Digital Holography.
ACS Biomater Sci Eng
January 2025
Mechanical Engineering Department, Worcester Polytechnic Institute, Worcester, Massachusetts 01609, United States.
Mechanical properties of engineered connective tissues are critical for their success, yet modern sensors that measure physical qualities of tissues for quality control are invasive and destructive. The goal of this work was to develop a noncontact, nondestructive method to measure mechanical attributes of engineered skin substitutes during production without disturbing the sterile culture packaging. We optimized a digital holographic vibrometry (DHV) system to measure the mechanical behavior of Apligraf living cellular skin substitute through the clear packaging in multiple conditions: resting on solid agar as when the tissue is shipped, on liquid media in which it is grown, and freely suspended in air as occurs when the media is removed for feeding.
View Article and Find Full Text PDFLens-Free On-Chip Quantitative Phase Microscopy for Large Phase Objects Based on a Biplane Phase Retrieval Method.
Sensors (Basel)
December 2024
Smart Computational Imaging Laboratory (SCILab), School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.
Lens-free on-chip microscopy (LFOCM) is a powerful computational imaging technology that combines high-throughput capabilities with cost efficiency. However, in LFOCM, the phase recovered by iterative phase retrieval techniques is generally wrapped into the range of -π to π, necessitating phase unwrapping to recover absolute phase distributions. Moreover, this unwrapping process is prone to errors, particularly in areas with large phase gradients or low spatial sampling, due to the absence of reliable initial guesses.
View Article and Find Full Text PDFModal Analysis with Asymptotic Strips Boundary Conditions of Skewed Helical Gratings on Dielectric Pipes as Cylindrical Metasurfaces for Multi-Beam Holographic Rod Antennas.
Sensors (Basel)
December 2024
Institute of Communications Engineering, National Yang Ming Chiao Tung University, Hsinchu 30010, Taiwan.
A core dielectric cylindrical rod wrapped in a dielectric circular pipe whose outer surface is enclosed by a helical conducting strip grating that is skewed along the axial direction is herein analyzed using the asymptotic strip boundary conditions along with classical vector potential analysis. Targeted for use as a cylindrical holographic antenna, the resultant field solutions facilitate the aperture integration of the equivalent cylindrical surface currents to obtain the radiated far fields. As each rod section of a certain skew angle exhibits a distinct modal attribute; this topology allows for the distribution of the cylindrical surface impedance via the effective refractive index to be modulated, as in gradient-index (GRIN) materials.
View Article and Find Full Text PDFAugmented Reality Assessments to Support Human Spaceflight Performance Evaluation.
Aerosp Med Hum Perform
November 2024
Introduction: As next-generation space exploration missions require increased autonomy from crews, real-time diagnostics of astronaut health and performance are essential for mission operations, especially for determining extravehicular activity readiness. An augmented reality (AR) system may be a viable tool allowing holographic visual cueing to replace physical objects used in traditional assessments.
Methods: In this study, 20 healthy adults were compared in an Ingress and Egress Task and Obstacle Weave Task with holographic and physical objects to determine the effect of AR on performance.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!