High rate algal ponds (HRAP) are an alternative to conventional wastewater treatment with the potential for wastewater and biomass reuse. In this study, we report the development and validation of methods for analysing 18 bisphenols (BPs) in the aqueous and biomass phase of HRAP. For aqueous phase samples, obtained LLOQ ranged from 10 to 30 ng/L, and recoveries from 78% to 106%. The relative expanded uncertainty was highest at the lowest spiking level (100 ng/L) and ranged from 27% to 66% (BPA), while for the biomass, the LLOQ ranged from 25 to 75 ng/g dw, recoveries from 84% to 103%. The uncertainty ranged from 16% to 37% (BPA). On average, the influent contained 329, 144, and 21 ng/L of BPA, BPS and 4,4'-BPF, and the effluent 69 ng/L, 94 ng/L and
Download full-text PDF
Source
http://dx.doi.org/10.1016/j.chemosphere.2021.129786 DOI Listing Publication Analysis
Top Keywords
ACS Omega
January 2025
Department of Chemistry, University at Albany - State University of New York (SUNY), 1400 Washington Avenue, Albany, New York 12222, United States.
The contamination of water with dyes stemming from the discharge of industrial waste poses significant environmental risks and health concerns. In this study, the phytoremediation potential of the wetland plant was investigated (as a function of plant biomass, pH, contact time, and initial dye concentration) for the removal of methylene blue and methyl red dyes from wastewater. The experimental adsorption capacities under the optimum conditions were found to be 1.
View Article and Find Full Text PDFFront Biosci (Landmark Ed)
January 2025
Department of Food Biotechnology and Microbiology, Institute of Food Sciences, Warsaw University of Life Sciences - SGGW, 02-776 Warsaw, Poland.
Background: This study investigated the selenium-binding capacity of the biomass of two yeast strains, American Type Culture Collection (ATCC) 7090 and CCY 20-2-26.
Methods: The studies carried out methods of bioaccumulation by yeast biomass. Inorganic selenium was added to the culture media as an aqueous solution of NaSeO at concentrations ranging from 0 to 40 mg Se/L.
Environ Res
January 2025
College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China. Electronic address:
Although various biochars from different biomass materials have been developed to remediate dye-contaminated environments, the removal capabilities of pristine biochar for dyes urgently require further enhancement due to insufficient surface adsorption sites. To introduce more adsorption sites, this work proposes a simple approach to fabricate coconut shell biochar (CSB) based adsorbent by anchoring zeolitic imidazolate framework-8 (ZIF-8) via the active sites provided by polydopamine (PDA)-coated CSB. The nucleation sites provided by the PDA layer promote the dispersion of ZIF-8 on the surface of CSB, resulting in sufficient adsorption sites for removing malachite green (MG) and rhodamine B (RB) from wastewater.
View Article and Find Full Text PDFChemosphere
January 2025
Department of Chemical Engineering, Birla Institute of Technology and Science (BITS), Pilani, 333031, Rajasthan, India. Electronic address:
Elevated emissions of flue gases deteriorate the quality of air, impacting both terrestrial and aquatic ecosystems through their contribution to acid rain and eutrophication. This study examines the bio-mitigation process in a packed bed reactor and its capacity to concurrently decrease the environmental consequences of industrial flue gases (CO, NO, and SO) and wastewater by employing mixed bacterial consortia. The highest biomass productivity achieved during the growth phase was 0.
View Article and Find Full Text PDFSmall
January 2025
Key Laboratory of Biomass Chemical Engineering (Education Ministry), College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, China.
Current hydrogel strain sensors have never been integrated into dynamic organ-on-a-chip (OOC) due to the lack of sensitivity in aqueous cell culture systems. To enhance sensing performance, a novel strain sensor is presented in which the MXene layer is coated on the bottom surface of a pre-stretched anti-swelling hydrogel substrate of di-acrylated Pluronic F127 (F127-DA) and chitosan (CS) for isolation from the cell culture on the top surface. The fabricated strain sensors display high sensitivity (gauge factor of 290.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!