Inventory review and environmental evaluation of first- and second-generation sugars through life cycle assessment.

In recent years, there has been a great movement towards the generation of knowledge related to the biorefinery concept. First-generation biorefineries bear the stigma of using arable land and edible crops for fuel instead of as sources of food and feed. However, second-generation biorefineries have not reached the level of full technical feasibility. Bearing in mind the objective of sugar production from sugar, starch, or lignocellulosic raw materials, the purpose of this study is to assess the environmental impact of first- and second-generation biorefineries, considering as an example for the comparative evaluation, the production of sugar fractions from crops (starch and sugar crops), and lignocellulosic biomass (hardwood and softwood). The characterization results were obtained using the ReCiPe 1.1 model, implemented through the SimaPro 9.0 software. Both production systems are inherently different and have strengths and weaknesses that must be carefully analyzed. The resulting environmental profile shows that the silviculture of wood contributes less to the environmental impact than cropping activities in most impact categories. In general, this study suggests that first-generation systems are burdened environmentally by the use of fertilizers, which have a significant impact on categories such as marine and freshwater eutrophication and terrestrial acidification, while second-generation systems are limited by the intensive processing steps needed for delignification, typically involving the use of chemicals and/or energy. LCA in early stages of the production of bio-based building blocks, rather than on the manufacture of biofuels or bioplastics, allows the precise identification of the environmental burdens that may be influencing the overall environmental profile of a biorefinery.