Aim: To evaluate surface roughness (SR), color stability (CS), and color masking as assessed through the relative translucency parameter (RTP) of different provisional restoration materials before and after water thermocycling (TC).
Materials And Methods: Four different provisional materialas were selected: acrylic resin, bis-acryl resin, polymethyl methacrylate (PMMA) CAD/CAM blocks, and 3D-printed provisional resin. Samples of 0.6- and 1.3-mm thickness were obtained, and SR, CS, and RTP were determined before and after the samples were submitted to 6000 cycles of TC. A rugosimeter was used to assess SR. Color was determined on white and black backgrounds before and after TC, and color masking was assessed through RTP. CS was determined using a spectrophotometer with the CIEDE2000 formula, before and after TC.
Results: SR values before and after TC ranged from -0.01 to 0.28 for 1.3 mm, and from 0.00 to 0.38 for 0.6 mm, respectively. CS (ΔE00 values) ranged from 0.53 to 4.38 for 1.3 mm, and from 0.70 to 5.66 for 0.6 mm, respectively. The highest value was obtained for 3D-printed resin. Finally, for RTP values, the difference before and after TC ranged from -0.036 to 2.66 for 1.3 mm, and from 0.52 to 2.57 for 0.6 mm, respectively, with the PMMA CAD/CAM block being the material with the lowest values in both cases.
Conclusion: Values of SR, CS, and RTP varied among different materials and thicknesses. The overall performance of 3D-printed resin was inferior to ?that of the other materials. The PMMA CAD/CAM block obtained the overall best values for the conditions tested.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Masking Ability of Subtractively and Additively Manufactured Dental Ceramic Restorations: A Systematic Review.
J Esthet Restor Dent
January 2025
Sir John Walsh Research Institute, Faculty of Dentistry, University of Otago, Dunedin, New Zealand.
Objective: To conduct a systematic review on the masking ability of subtractively and additively manufactured dental ceramics.
Materials And Methods: The study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The electronic search was carried out through MEDLINE, Scopus, and Website of Science databases with a date restriction being from 2001 onwards.
Impact of the resin cement opacity on the final color of conservative ceramic restorations and on its ability to mask substrates of different saturations.
Dent Mater
January 2025
Department of Biomaterials, School of Dentistry, University of São Paulo, Sao Paulo, Brazil.
Objective: To analyze the impact of the translucency/opacity of two commercial brands of resin cements and different translucency of lithium disilicate on the masking ability of saturated substrates.
Methods: 120 samples (n = 5) were prepared using 0.5 mm lithium disilicate (IPS e.
The role of inhibition in the processing of peripheral cues.
Psychol Res
January 2025
Institute of Cognition, Emotion, and Methods in Psychology, University of Vienna, Vienna, Austria.
The present study investigated the role of inhibition in peripheral cueing by nonpredictive cues. Based on past findings, we investigated the possibility that inhibition of learned irrelevant cue colors is typical of short cue-target intervals, with more competition for attention capture between cue versus target. In line with the expectation, in a modified contingent-capture protocol, with short cue-target intervals, we found same-location costs (SLCs) - that is, disadvantages for validly cued targets (cue = target position) compared to invalidly cued targets (cue ≠ target position) with consistently colored non-matching cues.
View Article and Find Full Text PDFIn vivo comparison of resin infiltration outcomes under different light conditions: A randomized controlled clinical trial.
J Dent
December 2024
Clinical Research, Dental-Material Gesellschaft mbH, Elbgaustraße 248, 22547, Hamburg, Germany; Department of Conservative Dentistry and Periodontology, LMU Klinikum, Goethestraße 70, 80336, Munich, Germany. Electronic address:
Objective: Success of resin infiltration for the masking of MIH-lesions remains difficult to predict, prompting suggestions to adjust the treatment protocol. This exploratory in vivo study aims to evaluate whether monitoring the resin infiltration process using transmitted light, compared to ambient light, enables a better estimation of when the infiltration process is completed, and to assess how the treatment success, i.e.
View Article and Find Full Text PDFExploiting 2D Neural Network Frameworks for 3D Segmentation Through Depth Map Analytics of Harvested Wild Blueberries ( Ait.).
J Imaging
December 2024
Faculty of Sustainable Design Engineering, University of Prince Edward Island, Charlottetown, PE C1A 4P3, Canada.
This study introduced a novel approach to 3D image segmentation utilizing a neural network framework applied to 2D depth map imagery, with Z axis values visualized through color gradation. This research involved comprehensive data collection from mechanically harvested wild blueberries to populate 3D and red-green-blue (RGB) images of filled totes through time-of-flight and RGB cameras, respectively. Advanced neural network models from the YOLOv8 and Detectron2 frameworks were assessed for their segmentation capabilities.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!