AI Article Synopsis
Article Abstract
Microfibrillated cellulose (MFC) is widely used as a reinforcement filler for biocomposites due to its unique properties. However, the challenge of drying MFC and the incompatibility between nanocellulose and polymer matrix still limits the mechanical performance of MFC-reinforced biocomposites. In this study, we used a water-based transesterification reaction to functionalize MFC and explored the capability of oven-dried MFC as a reinforcement filler for polylactic acid (PLA). Remarkably, this oven-dried, vinyl laurate-modified MFC improved the tensile strength by 38 % and Young's modulus by 71 % compared with neat PLA. Our results suggested improved compatibility and dispersion of the fibrils in PLA after modification. This study demonstrated that scalable water-based surface modification and subsequent straightforward oven drying could be a facile method for effectively drying cellulose nanomaterials. The method helps significantly disperse fibrils in polymers and enhances the mechanical properties of microfibrillar cellulose-reinforced biocomposites.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.carbpol.2020.117525 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Poly(3-hydroxybutyrate) Modified with Thermoplastic Polyurethane and Microfibrillated Cellulose: Hydrolytic Degradation and Thermal and Mechanical Properties.
Polymers (Basel)
December 2024
Faculty of Biology, University of Bucharest, 91-95 Splaiul Independentei, 050095 Bucharest, Romania.
Blending poly(3-hydroxybutyrate) (PHB) with other polymers could be a rapid and accessible solution to overcome some of its drawbacks. In this work, PHB was modified with microfibrillated cellulose (MC) and a thermoplastic polyurethane containing biodegradable segments (PU) by two routes, using a masterbatch and by direct mixing. The PU and MC modifiers improved the thermal stability of PHB by up to 13 °C and slightly decreased its melt viscosity and crystallinity, thus improving the melt processability.
View Article and Find Full Text PDFWood-Derived Hydrogels for Osteochondral Defect Repair.
ACS Nano
January 2025
Department of Biomaterials, Faculty of Dental Science, Kyushu University, 3-1-1 Maidashi, Higashi-ku, Fukuoka 812-8582, Japan.
Repairing cartilage tissue is a serious global challenge. Herein, we focus on wood skeletal structures that are highly porous for cell penetration yet have load-bearing strength, and aim to synthesize wood-derived hydrogels with the ability to regenerate cartilage tissues. The hydrogels were synthesized by wood delignification and the subsequent intercalation of citric acid (CA), which is involved in tricarboxylic acid cycles and essential for energy production, and -acetylglucosamine (NAG), which is a cartilage glycosaminoglycan, among cellulose microfibrils.
View Article and Find Full Text PDFCellulose-like chitosan microfibrils facilitate targeted release and enhance the prolonged residence time of quercetin-selenium nanoparticles for Alzheimer's disease treatment.
Int J Pharm
December 2024
College of Biological Science and Engineering, Fuzhou University, Fuzhou, 350108, China. Electronic address:
Article Synopsis
- The study explores how digestion affects the release and impact of bioactive compounds in delivery systems, specifically focusing on the role of gut microbiota in cellulose digestion.
- A new delivery system, QUE@SeNPs/CS/PVPNFs, is developed using chitosan and polyvinylpyrrolidone to enhance targeting and effectiveness of quercetin and selenium nanoparticles in the colon.
- Results indicate that this delivery system improves gut health, reduces inflammation, enhances cognitive ability in mice, and has a longer residence time compared to standard selenium nanoparticles.
Production of probiotic bacterial cellulose with improved yield, mechanical properties, and antibacterial activity from cost-effective coculture and mixed-culture fermentation in coconut water by Komagataeibacter xylinus MSKU 12.
Int J Biol Macromol
December 2024
Department of Microbiology, Faculty of Science, Kasetsart University, Bangkok 10900, Thailand; Biodiversity Center Kasetsart University (BDCKU), Bangkok 10900, Thailand. Electronic address:
We successfully enhanced bacterial cellulose (BC) production in low-cost coconut water (CW) at 37 °C by low-nutrient adaptation of Komagataeibacter xylinus MSKU 12. In this study, the BC yield was significantly increased by simultaneous coculture fermentation of MSKU 12 with Saccharomyces bayanus in Hestrin-Schramm (HS) and CW media. Coculture fermentation at 30 °C produced BC yields of 13.
View Article and Find Full Text PDFGenome-wide analysis of the cotton COBRA-like gene family and functional characterization of GhCOBL22 in relation to drought tolerance.
BMC Plant Biol
December 2024
Xinjiang Key Laboratory of Special Species Conservation and Regulatory Biology, College of Life Science, Xinjiang Normal University, Urumqi, 830017, China.
Background: The COBRA-like (COBL) gene family is a crucial glycosylphosphatidylinositol (GPI)-anchored proteins that participate in various biological processes in plants by regulating the arrangement of cell wall microfibrils. While the functions of COBL genes have been analyzed in several plant species, their roles in cotton's response to abiotic stress remain unexplored.
Results: This study identified and characterized the COBL gene family in Gossypium hirsutum, revealing a total of 39 COBL family members classified into five subgroups.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!