We report a novel approach toward the catalytic hydrogenation of CO to methanol performed in the gas-solid phase using multinuclear iridium complexes at low temperature (30-80 °C). Although homogeneous CO hydrogenation in water catalyzed by amide-based iridium catalysts provided only a negligible amount of methanol, the combination of a multinuclear catalyst and gas-solid phase reaction conditions led to the effective production of methanol from CO. The catalytic activities of the multinuclear catalyst were dependent on the relative configuration of each active species. Conveniently, methanol obtained from the gas phase could be easily isolated from the catalyst without contamination with CO, CH, or formic acid (FA). The catalyst can be recycled in a batchwise manner via gas release and filling. A final turnover number of 113 was obtained upon reusing the catalyst at 60 °C and 4 MPa of H/CO (3:1). The high reactivity of this system has been attributed to hydride complex formation upon exposure to H gas, suppression of the liberation of FA under gas-solid phase reaction conditions, and intramolecular multiple hydride transfer to CO by the multinuclear catalyst.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/jacs.0c11927 | DOI Listing |
J Phys Chem A
January 2025
School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China.
Microkinetic modeling of heterogeneous catalysis serves as an efficient tool bridging atom-scale first-principles calculations and macroscale industrial reactor simulations. Fundamental understanding of the microkinetic mechanism relies on a combination of experimental and theoretical studies. This Perspective presents an overview of the latest progress of experimental and microkinetic modeling approaches applied to gas-solid catalytic kinetics.
View Article and Find Full Text PDFSmall
December 2024
Department of Fiber Convergence Material Engineering, Dankook University, Gyeonggi-Do, 16890, Republic of Korea.
Approximately 2 billion people still lack access to clean drinking water. Extensive efforts are underway to develop semiconductor photocatalysts for water disinfection and environmental remediation, but conventional liquid-solid diphase interfacial photocatalysts face challenges like low diffusion coefficients and limited solubility of dissolved oxygen. This study introduces freestanding copper oxide fluffy pine needle structures (CO-FPNs) with tunable water pollutants-gas-solid (WGS) triple-phase interfaces that enhance oxygen enrichment and reactive oxygen species (ROS) production.
View Article and Find Full Text PDFPhys Rev Lett
December 2024
Departament de Física, Campus Nord B4-B5, Universitat Politècnica de Catalunya, E-08034 Barcelona, Spain.
We predict that ultracold bosonic dipolar gases, confined within a multilayer geometry, may undergo self-assembling processes, leading to the formation of chain gases and solids. These dipolar chains, with dipoles aligned across different layers, emerge at low densities and resemble phases observed in liquid crystals, such as nematic and smectic phases. We calculate the phase diagram using quantum Monte Carlo methods, introducing a newly devised trial wave function designed for describing the chain gas, where dipoles from different layers form chains without in-plane long-range order.
View Article and Find Full Text PDFAdv Mater
December 2024
Hefei National Research Center for Physical Sciences at the Microscale, National Synchrotron Radiation Laboratory, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China. Hefei, Anhui, 230026, China.
Li-rich Mn-based layered oxides (LRMOs) are regarded as the leading cathode materials to overcome the bottleneck of higher energy density. Nevertheless, they encounter significant challenges, including voltage decay, poor cycle stability, and inferior rate performance, primarily due to irreversible oxygen release, transition metal dissolution, and sluggish transport kinetics. Moreover, traditionally single modification strategies do not adequately address these issues.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
November 2024
School of Materials Science & Engineering, University of Jinan, 250022, Jinan, P. R. China.
The rising of MXenes not only enriches the two-dimensional material family but also brings more opportunities for diverse functional applications. However, the controllable synthesis of MXenes is still unsatisfied via the common liquid-solid etching route, considering the unsolved problems like safety risk, time cost and easy oxidation. Herein, a facile yet efficient gas-solid (G-S) reaction methodology is devised by using hydrogen fluoride gas derived from fluorinated organics as the MAX etchant toward high-efficiency fabrication of multiple MXenes and their derivatives.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!