Soliton microcombs constitute chip-scale optical frequency combs, and have the potential to impact a myriad of applications from frequency synthesis and telecommunications to astronomy. The demonstration of soliton formation via self-injection locking of the pump laser to the microresonator has significantly relaxed the requirement on the external driving lasers. Yet to date, the nonlinear dynamics of this process has not been fully understood. Here, we develop an original theoretical model of the laser self-injection locking to a nonlinear microresonator, i.e., nonlinear self-injection locking, and construct state-of-the-art hybrid integrated soliton microcombs with electronically detectable repetition rate of 30 GHz and 35 GHz, consisting of a DFB laser butt-coupled to a silicon nitride microresonator chip. We reveal that the microresonator's Kerr nonlinearity significantly modifies the laser diode behavior and the locking dynamics, forcing laser emission frequency to be red-detuned. A novel technique to study the soliton formation dynamics as well as the repetition rate evolution in real-time uncover non-trivial features of the soliton self-injection locking, including soliton generation at both directions of the diode current sweep. Our findings provide the guidelines to build electrically driven integrated microcomb devices that employ full control of the rich dynamics of laser self-injection locking, key for future deployment of microcombs for system applications.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7801488 | PMC |
http://dx.doi.org/10.1038/s41467-020-20196-y | DOI Listing |
An ultra-narrow-linewidth laser is a core device in fields such as optical atomic clocks, quantum communications, and microwave photonic oscillators. This paper reports an ultra-narrow-linewidth self-injection locked semiconductor laser, which is realized through optical feedback from a high-Q (258 million) Fabry-Perot (FP) cavity constructed with three mirrors, generating an output power of 12 mW. Employing a delay self-heterodyne method based on a signal source analyzer, the phase noise of the laser is -129 dBc/Hz at 100 kHz offset frequency, with an intrinsic linewidth of 3 mHz.
View Article and Find Full Text PDFMid-infrared (MIR) microcombs exhibit remarkable advantages for trace molecule detection, facilitating fast and precise spectral analysis. However, due to limitations in tunability and size of available MIR pump sources, it is difficult to achieve compact MIR mode-locked microcombs using traditional methods. Here, we propose the turnkey generation of MIR soliton and near-infrared second-harmonic microcombs in a single microresonator.
View Article and Find Full Text PDFFrequency-modulated continuous-wave (FMCW) narrow linewidth lasers have served as the cornerstone behind applications such as autonomous driving, wearable technology, virtual reality, and remote sensing mapping. Strongly coherent lasers are typically used for these studies, with a clear demand for linear fast response and wide frequency tuning range. In this paper, profiting from the ultrahigh-quality factor of the crystalline whispering-gallery-mode resonator, by using a self-injection locking mechanism to suppress spontaneous emission noise and improve coherence, sub-kHz linewidth at 450 nm is obtained.
View Article and Find Full Text PDFThe present study proposes and demonstrates a narrow-linewidth thulium-holmium co-doped fiber laser based on self-injection locking. The laser with single-longitudinal-mode operation is realized using a fiber Bragg grating as a wavelength-selection component and a dual-ring compound cavity as a mode-selection filter. The linewidth was compressed by increasing the photon lifetime by utilizing delay fibers of different lengths in the feedback cavity.
View Article and Find Full Text PDFSci Rep
November 2024
Department of Electrical and Computer Engineering, University of California Santa Barbara, Santa Barbara, CA, 93106, USA.
Today's precision experiments for timekeeping, inertial sensing, and fundamental science place strict requirements on the spectral distribution of laser frequency noise. Rubidium-based experiments utilize table-top 780 nm laser systems for high-performance clocks, gravity sensors, and quantum gates. Wafer-scale integration of these lasers is critical for enabling systems-on-chip.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!