In this work, loess-based materials were designed based on a multicomponent composite materials system for ecofriendly natural three-dimensional (3D) printing involving quick lime, gypsum, and water. The 3D printing process was monitored as a function of gypsum content; in terms of mechanical strength and electrical resistance, in the cube-shaped bulk form. After initial optimization, the 3D printing composition was refined to provide improved printability in a 3D printing system. The optimal 3D fabrication allowed for reproducible printing of rectangular columns and cubes. The development of 3D printing materials was scrutinized using a multitude of physicochemical probing tools, including X-ray diffraction for phase identification, impedance spectroscopy to monitor setting behaviors, and mercury intrusion porosimetry to extract the pore structure of loess-based composite materials. Additionally, the setting behavior in the loess-based composite materials was analyzed by investigating the formation of gypsum hydrates induced by chemical reaction between quick lime and water. This setting reaction provides reasonable mechanical strength that is sufficient to print loess-based pastes via 3D printing. Such mechanical strength allows utilization of robotic 3D printing applications that can be used to fabricate ecofriendly structures.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7826633 | PMC |
| http://dx.doi.org/10.3390/ma14020293 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Defining Structure-Function Relationships of Amphiphilic Excipients Enables Rational Design of Ultra-Stable Biopharmaceuticals.
Adv Sci (Weinh)
January 2025
Department of Materials Science & Engineering, Stanford University, Stanford, CA, 94305, USA.
Biopharmaceuticals are the fastest-growing class of drugs in the healthcare industry, but their global reach is severely limited by their propensity for rapid aggregation. Currently, surfactant excipients such as polysorbates and poloxamers are used to prevent protein aggregation, which significantly extends shelf-life. Unfortunately, these excipients are themselves unstable, oxidizing rapidly into 100s of distinct compounds, some of which cause severe adverse events in patients.
View Article and Find Full Text PDFEnhanced safety and efficacy profile of CD40 antibody upon encapsulation in pHe-triggered membrane-adhesive nanoliposomes.
Nanomedicine (Lond)
January 2025
Department of Pharmaceutical Sciences, Eugene Applebaum College of Pharmacy and Health Sciences, Wayne State University, Detroit, MI, USA.
Aim: To develop pH (pHe)-triggered membrane adhesive nanoliposome (pHTANL) of CD40a to enhance anti-tumor activity in pancreatic cancer while reducing systemic toxicity.
Materials And Methods: A small library of nanoliposomes (NL) with various lipid compositions were synthesized to prepare pH (pHe)-triggered membrane adhesive nanoliposome (pHTANL). Physical and functional characterization of pHTANL-CD40a was performed via dynamic light scattering (DLS), Transmission Electron Microscopy (TEM), confocal microscopy, and flow cytometry.
3D Printing of a Self-Healing, Bioactive, and Dual-Cross-Linked Polysaccharide-Based Composite Hydrogel as a Scaffold for Bone Tissue Engineering.
ACS Appl Bio Mater
January 2025
Advanced Magnetic Materials Research Center, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, North Kargar Street, Tehran 11155-4563, Iran.
Although 3D printing is becoming a dominant technique for scaffold preparation in bone tissue engineering (TE), developing hydrogel-based ink compositions with bioactive and self-healing properties remains a challenge. This research focuses on developing a bone scaffold based on a composite hydrogel, which maintains its self-healing properties after incorporating bioactive glass and is 3D-printable. The plain hydrogel ink was synthesized using natural polymers of 1 wt % N-carboxyethyl chitosan, 2 wt % hyaluronic acid aldehyde, 0.
View Article and Find Full Text PDFScalable InGaN nanowire µ-LEDs: paving the way for next-generation display technology.
Natl Sci Rev
January 2025
Division of Advanced Materials Engineering, College of Engineering, Research Center for Advanced Materials Development (RCAMD), Jeonbuk National University (JBNU), Jeonju 54896, South Korea.
Ever-increasing demand for efficient optoelectronic devices with a small-footprinted on-chip light emitting diode has driven their expansion in self-emissive displays, from micro-electronic displays to large video walls. InGaN nanowires, with features like high electron mobility, tunable emission wavelengths, durability under high current densities, compact size, self-emission, long lifespan, low-power consumption, fast response, and impressive brightness, are emerging as the choice of micro-light emitting diodes (µLEDs). However, challenges persist in achieving high crystal quality and lattice-matching heterostructures due to composition tuning and bandgap issues on substrates with differing crystal structures and high lattice mismatches.
View Article and Find Full Text PDFOptimization of Tratt pomace fermentation process and the effects of mono- and mixed culture fermentation on its chemical composition.
Front Nutr
December 2024
State Key Laboratory of Functions and Applications of Medicinal Plants and School of Pharmaceutical Sciences, Guizhou Medical University, Guiyang, China.
Background: Tratt pomace (RRTP) contains valuable components like polyphenols and polysaccharides, which have high utilization value. Fermentation is an effective technique for creating beneficial nutrients that can improve the taste, appearance, and nutritional benefits of foods. Nevertheless, there is a lack of research on the alterations in chemical composition of RRTP during fermentation.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!