Enhanced Dielectric and Hydrophobic Properties of Poly(vinylidene fluoride-trifluoroethylene)/TiO Nanowire Arrays Composite Film Surface Modified by Electrospinning.

In this research, we designed a feasible method to prepare composite films with high permittivity and significantly enhanced hydrophobic performance, which showed huge potential in the electrowetting field. TiO nanowire arrays were prepared by a one-step hydrothermal process, and poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) was spin-coated on the nanowire arrays to form composite, the surface of which was modified by electrospinning. Due to the great orientation of TiO nanowires, dipoles and space charges are in ordered arrangement along the electric field, and this strongly reinforced the Maxwell-Wagner-Sillars (MWS) polarization, thus the permittivity of the composite (TiO nanowire length/film thickness is 0.769) reaches 53 at 1 kHz, which is nearly 3 times higher than pure P(VDF-TrFE). Meanwhile the composite film possesses low dielectric loss (0.07) and low conductivity (2.69 × 10 S/cm), showing good insulation. The contact angle of the composite after electrospinning (about 137°) was greatly enhanced from pure P(VDF-TrFE) spin-coated film (about 89°), which can be attributed to the microrough structure built by P(VDF-TrFE) nanofibers.