Plasmonic nanostructures have proven an extensive practical prospect in ultra-sensitive label-free biomolecule sensing due to their nanoscale localization and large near-field enhancement. Here, we demonstrate a photonic plasmonic hybridization in the self-aligned disk/hole nanocavity array under two specific cases of nanogap and nanooverlap achieved by adjusting pillar height embedded into hole. The proposed disk/hole arrays in above two cases exhibit three hybridized modes with extremely high absorption, mainly arising from the in-phase (bonding) and out-of-phase (antibonding) coupling of dipolar modes of their parent disk and hole. Surprisingly, when the nanogap feature of the disk/hole array is transformed to the nanooverlap, crossing the quantum effect region, the bonding mode in the disk/hole array has an enormous transition in the resonant frequency. In comparison with the counterpart in the nanogap structure, the bonding mode in the nanooverlap structure supports strongest near-field localization (i.e., the decay length down to merely 3.8 nm), although charge transfer channel provided by the geometry connect between disk and hole quenches partial field enhancement. Furthermore, we systematically investigate the sensing performances of multiple hybridized modes in above two cases by considering two crucial evaluating parameters, bulk refractive index sensitivity and surface sensitivity. It is demonstrated that, in the nanogap structure, the bonding mode possesses both high bulk refractive index sensitivity and surface sensitivity. Dissimilarly, for the nanooverlap structure, the bonding and antibonding modes show different surface sensitivities in different regions away from the surface, which can be used to monitoring different bio-molecular sizes and achieve the most optimum sensitivity. Due to its unique sensing features, this disk/hole array mechanism is very valuable and promising for developing of high sensitivity sensing platform.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OE.411773 | DOI Listing |
Achieving high-Q resonances in the THz frequency range is significant for applications such as sensors, filters, and emitters. A promising approach for obtaining such resonances is by using metamaterials. However, high-Q resonances in THz metamaterials are usually limited by metallic radiation losses in the meta-atoms.
View Article and Find Full Text PDFPlasmonic nanostructures have proven an extensive practical prospect in ultra-sensitive label-free biomolecule sensing due to their nanoscale localization and large near-field enhancement. Here, we demonstrate a photonic plasmonic hybridization in the self-aligned disk/hole nanocavity array under two specific cases of nanogap and nanooverlap achieved by adjusting pillar height embedded into hole. The proposed disk/hole arrays in above two cases exhibit three hybridized modes with extremely high absorption, mainly arising from the in-phase (bonding) and out-of-phase (antibonding) coupling of dipolar modes of their parent disk and hole.
View Article and Find Full Text PDFNanoscale Adv
February 2020
HUECK FOLIEN GmbH Gewerbepark 30 4342 Baumgartenberg Austria.
In this study, ultrathin silver plasmonic nanostructures are fabricated by sputter deposition on substrates patterned by nanoimprint lithography, without additional lift-off processes. Detailed investigation of silver growth on different substrates results in a structured, defect-free silver film with thickness down to 6 nm, deposited on a thin layer of doped zinc oxide. Variation of the aspect ratio of the nanostructure reduces grain formation at the flanks, allowing for well-separated disk and hole arrays, even though conventional magnetron sputtering is less directional than evaporation.
View Article and Find Full Text PDFNanotechnology
June 2019
Photovoltaic Systems, AIT-Austrian Institute of Technology, Giefinggasse 4, A-1210 Vienna, Austria.
A nanostructured transparent electrode with high average visible transmittance of 76%, low sheet resistance of 7.0 Ω/sq and steep transmittance drop in the near-infrared (NIR) range is investigated by simulations and experiments. The electrode is composed of a nanostructured substrate, on which a trilayer, consisting of an ultrathin 14 nm thick silver film embedded between thin films of TiO and Al-doped ZnO, is deposited.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!