The objective of this study is the simulation of the most affected design factors and variables of the clutch pack for the power-shift transmission (PST) of a tractor based measured data. The simulation model, the mathematical model of sliding velocity, a moment of inertia, and clutch engagement pressure of clutch pack were developed using the powertrain and configurations of the real PST tractor. In this study, the sensor fusion method was used to precisely measure the proportional valve pressure by test bench, which was applied to the simulation model. The clutch engagement times were found 1.20 s at all temperatures for determined factors. The engagement pressures have a significant difference at various temperatures (25 to 100 °C) of the hydraulic oils after the 1.20 s but the most affected factors were satisfied with the simulation conditions that ensure the clutch engagement on time. Finally, this sensor fusion method is believed to be helpful in realizing precision agriculture through minimization of power loss and maximum energy efficiency of tractors.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7765877 | PMC |
| http://dx.doi.org/10.3390/s20247293 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A methodology for image-based measurement of plate movement in disengaged wet clutches.
Sci Rep
April 2024
School of Engineering and Design, Department of Mechanical Engineering, Gear Research Center (FZG), Technical University of Munich, 85748, Garching, Munich, Germany.
The drag loss behavior of a disengaged wet clutch is influenced, among other things, by the movement of the plates. Therefore, knowledge about the plate movement is essential for investigating and optimizing the drag loss behavior. This paper presents a methodology for image-based measurement of plate movement in disengaged wet clutches.
View Article and Find Full Text PDFSimulation of Design Factors of a Clutch Pack for Power-Shift Transmission for an Agricultural Tractor.
Sensors (Basel)
December 2020
Department of Bio-Mechatronics Engineering, Sungkyunkwan University, Suwon 16419, Korea.
The objective of this study is the simulation of the most affected design factors and variables of the clutch pack for the power-shift transmission (PST) of a tractor based measured data. The simulation model, the mathematical model of sliding velocity, a moment of inertia, and clutch engagement pressure of clutch pack were developed using the powertrain and configurations of the real PST tractor. In this study, the sensor fusion method was used to precisely measure the proportional valve pressure by test bench, which was applied to the simulation model.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!