Effect of Chemical Blowing Agent on the PVC Cellular Coating Extrusion.

Depending on the type and application, the coatings of power, electric, telecommunication cables as well as other types of conduits are made of various kinds of polymer plastics. However, most often, because of good mechanical properties and many other advantages, they are first of all made from polyvinyl chlorine (PVC). This paper contains characteristics of the developed cellular extrusion of cable coatings, as well as specification of the blowing agent (BA) used and selected research results of the obtained cellular extrusion product. In technological tests the coating extrusion technological line was used. The material was modified with a new blowing agent of exothermic distribution of process characteristics, which was introduced into the material in quantities from 0.2 to 0.6% wt. The amount of blowing agent used has a direct impact on the density and structure of the received result for the extrusion of modified polymers. The cellular structure of the cellular coatings was presented. The results of the study are thin-walled properties of single- and double-layer cellular outer coatings, forming an outer surface on a steel wire. The research on the structure of manufactured materials, density and the degree of porosity, water and oil absorptivity, mechanical strength is presented.