Background: Tracking the whole body center of mass (CoM) trajectory of balance-impaired individuals with a personalized model is useful in the development of customized fall prevention strategies. A personalized CoM estimate can be obtained using the statically equivalent serial chain (SESC) method, but the subject has to perform an identification procedure to determine the set of subject-specific SESC parameters. During this identification, the subject must hold a series of static poses, some of which are unsuitable for balanced-impaired individuals.
Research Question: Can non-static poses be used to replace the static poses during SESC parameter identification?
Methods: A new method that extends the range of postures used to determine SESC parameters is presented. It takes advantage of CoM dynamics and can be executed by predominantly using dynamic motions with a few static frames. Furthermore, it is implemented using a Kalman filter to allow automatic switching between the dynamic and static models. The proposed method was tested with motion data obtained from seven healthy adults using a Vicon motion capture system and an AMTI force platform.
Results: We found that dynamic motions could be used to estimate the SESC parameter and even reproduce ground reaction forces; however a small number of static poses are still required to determine the subject's CoM position. The SESC-based CoM estimate obtained with this new approach was similar to that obtained using conventional full-static identification, except that the subject did not have to assume and maintain static poses.
Significance: Our proposed extension of the conventional SESC method would facilitate its application in the field of neuro-rehabilitation, especially in patients who need balance training. This personalized CoM method could be applicable for patients who are not able to maintain a static posture. In addition, this method helps minimize the total identification time by increasing the number of usable recorded frames.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.gaitpost.2020.11.021 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Co-Existing Nanoplastics Further Exacerbates the Effects of Triclosan on the Physiological Functions of Human Serum Albumin.
Life (Basel)
January 2025
School of Environment and Geography, Qingdao University, Qingdao 266071, China.
The potential health risks posed by the coexistence of nanoplastics (NPs) and triclosan (TCS) have garnered significant attention. However, the effects and underlying mechanisms of NPs and TCS on key functional proteins at the molecular level remain poorly understood. This study reports the effect of polystyrene nanoplastics (PSNPs) on the binding of TCS to human serum albumin (HSA) using multispectral methods and molecular simulation systems.
View Article and Find Full Text PDFExperimental investigation on the seismic resistance of RC columns after acid rain corrosion.
Sci Rep
January 2025
College of Civil Engineering and Communication, North China University of Water Resources and Electric Power, Zhengzhou, 450045, China.
Acid rain can significantly undermine the structural integrity and seismic resilience of concrete structures, posing substantial risks of catastrophic failures and jeopardizing safety. However, studies on the seismic behavior of reinforced concrete (RC) columns affected by acid rain corrosion remain nascent. Therefore, this study explored the impact of acid-rain corrosion extent and axial compression ratio on the seismic behavior of RC columns that experienced flexural failure using an artificial rapid corrosion method and pseudo-static test in sequence.
View Article and Find Full Text PDFA Computational Fluid Dynamics Analysis of BiPAP Pressure Settings on Airway Biomechanics Using a CT-Based Respiratory Tract Model.
Respir Physiol Neurobiol
January 2025
School of Mechanical and Mechatronic Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, NSW 2007, Australia. Electronic address:
Central and Obstructive Sleep Apnea (CSA and OSA), Chronic Obstructive Pulmonary Disease (COPD), and Obesity Hypoventilation Syndrome (OHS) disrupt breathing patterns, posing significant health risks and reducing the quality of life. Bilevel Positive Airway Pressure (BiPAP) therapy offers adjustable inhalation and exhalation pressures, potentially enhancing treatment adaptability for the above diseases. This is the first-ever study that employs Computational Fluid Dynamics (CFD) to examine the biomechanical impacts of BiPAP under four settings: Inspiratory Positive Airway Pressure (IPAP)/Expiratory Positive Airway Pressure (EPAP) of 12/8, 16/6, and 18/8 cmHO, compared to a without-BiPAP scenario of zero-gauge pressure.
View Article and Find Full Text PDFExploration of biomass-derived carbon dots based on chestnut shell for the sensitive detection of phosphate and tetracycline hydrochloride.
Spectrochim Acta A Mol Biomol Spectrosc
January 2025
Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, China.
Phosphate pollution leads to the deterioration of water quality, posing a serious threat to human health. Tetracycline hydrochloride (TC), a class of broad-spectrum bacteriostatic agents, has garnered attention due to its extensive use and potential toxicity. Therefore, developing a highly selective and sensitive fluorescent probe for the detection of phosphates and TC is of significant importance.
View Article and Find Full Text PDFOptimization of surface roughness for titanium alloy based on multi-strategy fusion snake algorithm.
PLoS One
January 2025
School of Mechanical Engineering, Liaoning Technical University, Fuxin, China.
Titanium alloy is known for its low thermal conductivity, small elastic modulus, and propensity for work hardening, posing challenges in predicting surface quality post high-speed milling. Since surface quality significantly influences wear resistance, fatigue strength, and corrosion resistance of parts, optimizing milling parameters becomes crucial for enhancing service performance. This paper proposes a milling parameter optimization method utilizing the snake algorithm with multi-strategy fusion to improve surface quality.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!