Characterization of rare earth elements present in coal ash by sequential extraction.

J Hazard Mater

Civil and Environmental Engineering, Konkuk University, 120 Neungdong-ro Gwangjin-gu, Seoul 05029, South Korea. Electronic address:

Published: January 2021

Although it has recently been reported that notable amounts of rare earth elements (REEs) are present in the residual coal ash, little is currently known regarding the association of these elements with the coal ash matrix, thereby limiting the potential for extraction of REEs from coal ash. In this study, we analyzed the binding characteristics of REEs within coal ash via sequential extraction and examined REE recovery during a coal ash recycling process. Major components of coal ash were found to be mineral oxides, mainly composed of Si, Fe, Al, and Ca, and residual carbons. Bottom and fly ashes were found to contain 185.8 mg/kg and 179.2 mg/kg of REEs, respectively. Tessier sequential extraction confirmed that 85 % of REEs are included in the residual fraction of both bottom and fly ashes. Furthermore, BCR sequential extraction revealed that 60-70 % of REEs are contained within the residual fraction, thereby indicating that REEs are strongly bound in both bottom and fly ashes and the use of very strong acids is required for the thorough extraction of REEs from coal ash. Additionally, it was found that 46.3 % of REEs can be recovered from the wastewaters produced during the process of coal ash-derived zeolite synthesis.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2020.123760DOI Listing

Publication Analysis

Top Keywords

coal ash
32
sequential extraction
16
rees coal
12
bottom fly
12
fly ashes
12
coal
9
rees
9
rare earth
8
earth elements
8
elements coal
8

Similar Publications

Mechanical Properties and Durability Performance of Low Liquid Limit Soil Stabilized by Industrial Solid Waste.

Materials (Basel)

January 2025

Cangzhou Municipal Engineering Company Limited, Cangzhou 061000, China.

To improve the mechanical and durability properties of low liquid limit soil, an eco-friendly, all-solid, waste-based stabilizer (GSCFC) was proposed using five different industrial solid wastes: ground granulated blast-furnace slag (GGBS), steel slag (SS), coal fly ash (CFA), flue-gas desulfurization (FGD) gypsum, and carbide slag (CS). The mechanical and durability performance of GSCFC-stabilized soil were evaluated using unconfined compressive strength (UCS), California bearing ratio (CBR), and freeze-thaw and wet-dry cycles. The Rietveld method was employed to analyze the mineral phases in the GSCFC-stabilized soil.

View Article and Find Full Text PDF

As hydraulic fracturing becomes increasingly prevalent in the oil and gas industry, there is a growing need to develop more cost-effective and sustainable technologies, particularly concerning the materials used. Proppants play a vital role in hydraulic fracturing by ensuring that fractures remain conductive and can withstand the pressure exerted by the surrounding strata. One key parameter for evaluating proppants is their compressive strength, especially under harsh environmental conditions.

View Article and Find Full Text PDF

As a typical ecologically fragile area, the Wudong Coal Mine region in Xinjiang generates large accumulations of coal gangue each year, which, in the alkaline soil environment, can easily lead to significant leaching and accumulation of As. This study developed a stabilizer (CFD) using cement, fly ash, and desulfurized gypsum to modify in-situ soil in the Xinjiang mining area, resulting in a modified solidified soil with excellent geotechnical performance and As stabilization capability. The study results showed that when CFD content exceeded 14.

View Article and Find Full Text PDF

The formation of an aluminosilicate gel structure made of alkali-activated materials (AAMs) was conducted through an alkali-activation reaction of the solid precursors (fly ash, metakaolin, and wood ash). Fly and wood ash are by-products of the burning process of coal and wood, respectively. Alkali-activated materials of aluminosilicate origin, made from the different ashes, fly and wood, are very attractive research targets and can be applied in various technological fields due to their thermal stability, resistance to thermal shock, high porosity, high sustainability, and finally, low energy loss during production.

View Article and Find Full Text PDF

Nanoscale Fe(0)-zeolite composite derived from coal bottom ash for efficient treatment of Cr(VI)-contaminated groundwater: Unveiling the importance of locations for surface-bound Fe(II) and Fe(0) passivation products.

J Hazard Mater

January 2025

Department of Civil and Environmental Engineering, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, Seoul 05029, Republic of Korea; Department of Environmental Engineering, Graduate School, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, Seoul 05029, Republic of Korea. Electronic address:

The synthesis of coal bottom ash-induced zeolite (Si-Al material) has been widely reported; however, the selective recovery of the three main elements, viz., Si, Al, and Fe, from coal bottom ash for the synthesis of reactive adsorbents has not yet been reported. In this study, we separated the magnetic and non-magnetic fractions of coal bottom ash to selectively recover Fe and Si-Al for synthesizing nanoscale zero-valent iron@zeolite (NZVI@ZBA) composites with uniform formation of Fe(0) nanoparticles on the ZBA surface.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!