Removal of As(V) from water using galvanically coupled sacrificial metals.

J Hazard Mater

Vivekanandha Arts and Science College for Women, Veerachipalayam, Sankari (t.k), Salem District 637303, India.

Published: May 2021

The Permeable reactive barriers (PRBs) is one of the sustainable methods of environmental remediation for groundwater treatment. On using iron as reactive media for PRBs, the longevity of the column is affected by the accumulation of iron corrosion products resulting in permeability reduction. Hence, in this work, iron and zinc are employed as sacrificial metals to remove 50 mg/L As(V) from aqueous solution in an oxic environment, where copper is added as a noble metal. The iron-based system followed first-order reaction kinetics with rate constants -1.65 × 10 min for iron and 2.95 × 10 min for copper-iron. The zinc-based system followed second-order reaction kinetics with rate constants - 1.26 × 10 L.mg.minfor zinc and 4.67 × 10 L.mg.min for copper-zinc. The half-life was computed to be 420.1, 234.9. 171.1, and 46.6 min for Fe, Cu‒Fe, Zn, and Cu‒Zn. The constant supply of adsorption sites is ensured by the continuous generation of corrosion products by sacrificial metals on galvanically coupling with copper. The effectiveness of arsenic retention can be in the order: Cu‒Zn > Cu‒Fe > Zn > Fe. Among the studied systems, the copper-zinc system can be suggested as the best possible reactive media for PRB in arsenic remediation of groundwater.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2020.124564DOI Listing

Publication Analysis

Top Keywords

sacrificial metals
12
remediation groundwater
8
reactive media
8
corrosion products
8
reaction kinetics
8
kinetics rate
8
rate constants
8
removal asv
4
asv water
4
water galvanically
4

Similar Publications

Coordination-driven metallo-supramolecular polymers hold significant potential as highly efficient catalysts for photocatalytic CO reduction, owing to the covalent integration of the light harvesting unit, catalytic center and intrinsic hierarchical nanostructures. In this study, we present the synthesis, characterization, and gelation behaviour of a novel low molecular weight gelator (LMWG) integrating a benzo[1,2-:4,5-']dithiophene core with terpyridine (TPY) units alkyl amide chains (TPY-BDT). The two TPY ends of the TPY-BDT unit efficiently chelate with metal ions, enabling the formation of a metallo-supramolecular polymer that brings together the catalytic center and a photosensitizer in close proximity, maximizing catalytic efficiency for CO reduction.

View Article and Find Full Text PDF

The direct electrochemical carboxylation of aryl, benzyl and alkyl halides by CO is described using a magnesium anode and a nickel foam cathode in an undivided cell. The process employs a sacrificial anode and does not require the additional use of a transition metal catalyst or demanding conditions, as the reactions are carried out under galvanostatic mode, at -10 °C and with commercial DMF. Under these operationally simple conditions, an important range of carboxylic acids are affordable.

View Article and Find Full Text PDF

Photocatalytic reduction of nitrate to N holds great significance for environmental governance. However, the selectivity of nitrate reduction to N is influenced by sacrificial agents and the kinds of cocatalysts (such as Pt and Ag). The presence of unconsumed sacrificial agents can aggravate environmental pollution, while noble metal-based cocatalysts increase application costs.

View Article and Find Full Text PDF

This work aimed at addressing the problem of hexavalent chromium pollution in the water environment, designing and preparing the Cu/CuO/NH-MIL-88B (Fe) heterojunction material with NH-MIL-88B (Fe) as the carrier, Cu/CuO was loaded on NH-MIL-88B (Fe) by light-assisted reduction. The loading of CuO effectively improves the visible light absorption capacity of the composite material. The SPR effect of Cu improves the separation and transfer of photogenerated carriers in the composite material.

View Article and Find Full Text PDF

Rational regulation of interface structure in photocatalysts is a promising strategy to improve the photocatalytic performance of carbon dioxide (CO) reduction. However, it remains a challenge to modulate the interface structure of multi-component heterojunctions. Herein, a strategy integrating heterojunction with facet engineering is developed to modulate the interface structure of metal-organic frameworks (MOF)-based heterojunctions.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!