The vat-based 3D printing of a chemical reactor with flow-meter geometry from an isocyanate-functionalized acrylate monomer followed by post-processing with amino-functionalized photocatalysts is described. This approach results in solvent- and air-stable flow photochemical reactors with UV-A transparent windows that can be applied for photooxygenation and photo redox catalysis.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/d0cc06512a | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Synthesis and characterization of dextran palmitate for extrusion 3D printing.
Int J Biol Macromol
January 2025
KU Leuven, Department of Chemical Engineering, Chemical and Biochemical Reactor Engineering and Safety (CREaS), Celestijnenlaan 200F, 3001 Leuven, Belgium. Electronic address:
The fabrication of objects with complex shape and geometry has been greatly facilitated with the advancements in additive manufacturing. While synthetic polymers like ABS and PLA have found widespread use in extrusion 3D printing, other biobased thermoplastics that are both biodegradable and biocompatible could offer strategic advantages over traditional synthetic materials. In this work dextran of low (20 kDa) and medium (40 kDa) molecular weight (MW) was modified with palmitic acid to obtain meltable polymers for extrusion 3D printing/fused deposition modeling additive manufacturing.
View Article and Find Full Text PDFBridge Radius Evolution during Coalescence of Ferrofluid Droplets Suspended in a Nonmagnetic Outer Fluid.
Langmuir
January 2025
Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781039, India.
Understanding the droplet coalescence/merging is vital for many areas of microfluidics such as biochemical reactors, drug delivery, inkjet printing, oil recovery, etc. In the present study, we carried out numerical simulations of two magnetic droplets suspended in a nonmagnetic fluid matrix and coalescing under the influence of an external magnetic field. We observed that the applied magnetic field played a key role in the merging dynamics of the magnetic droplets.
View Article and Find Full Text PDFInorganic/Inorganic Composites Through Emulsion Templating.
Adv Mater
December 2024
Centre for Advanced Structural Ceramics, Department of Materials, Imperial College London, London, SW7 2AZ, UK.
Inorganic/inorganic composites are found in multiple applications crucial for the energy transition, from nuclear reactors to energy storage devices. Their microstructures dictate their properties from mass transport to fracture resistance. Consequently, there has been a multitude of processes developed to control them, from powder mixing and the use of short or long fibers, to tape casting for laminates up to recent 3D printing.
View Article and Find Full Text PDFLipid production from biofilms of Marinobacter atlanticus in a fixed bed bioreactor.
Microb Cell Fact
December 2024
Center for Biomolecular Science and Engineering, US Naval Research Laboratory, Washington, DC, 20375, USA.
Background: Biotechnologies that utilize microorganisms as production hosts for lipid synthesis will enable an efficient and sustainable solution to produce lipids, decreasing reliance on traditional routes for production (either petrochemical or plant-derived) and supporting a circular bioeconomy. To realize this goal, continuous biomanufacturing processes must be developed to maximize productivity and minimize costs compared to traditional batch fermentation processes.
Results: Here, we utilized biofilms of the marine bacterium, Marinobacter atlanticus, to produce wax esters from succinate (i.
Efficient degradation of tetracycline by Mn(III)-microbial complexes mediated by mnOx@ACF in sequencing batch reactors: performance, mechanism, and effect on microbial community structure.
Water Sci Technol
December 2024
School of Resources and Environment, Wuhan Textile University, Engineering Research Centre for Clean Production of Textile Dyeing and Printing, Ministry of Education, Wuhan 430073, China; State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China E-mail:
Engineered nanomaterials are widely used in water and wastewater treatment processes, and minimizing their adverse effects on biological treatment processes in wastewater treatment plants has become the primary focus. In this study, activated carbon fiber (ACF)-loaded manganese oxide nanomaterials (MnOx@ACF) were synthesized. A small-scale sequencing batch reactor (SBR) was constructed to simulate the synergistic degradation of pollutants by nanomaterials and microorganisms and the effects of nanomaterials on the structure of the microbial community in a wastewater treatment plant.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!