In this study, a nanocomposite was synthesized via the formation of silver nanoparticles on fumed silica (FS@Ag) to prepare an electrochemical sensor for the determination of carbendazim (CBZ), a common pesticide. The electrochemical sensor was designed by the combination of the carbon paste electrode (CPE) with the FS@Ag nanocomposite. Based on the electrochemical sensor prepared here, a voltammetric method was developed for the determination of CBZ in water and food samples. Characterization of the nanocomposite was conducted by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray analyses. Modified electrodes were also electrochemically characterized via cyclic voltammetry and electrochemical impedance spectroscopy analyses. The FS@Ag showed electrocatalytic activity on the electrochemical oxidation of CBZ via increasing the peak currents tremendously. With the proposed method, a very low limit of detection (9.4 × 10 M) and a wide linear range (5.0 × 10 M - 3.0 × 10 M) were obtained for CBZ. The slope of the calibration line obtained with CPE/15FS@Ag was 194-times higher than that of bare CPE, indicating the high sensitivity of the electrochemical sensor. The performance of the electrochemical sensor has been investigated in real samples such as river water, tomato juice, orange juice, and apple juice samples. The results reveal that the electrochemical sensor prepared here can be used as an alternative to current analytical methods used for the quantification of CBZ.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.talanta.2020.121591DOI Listing

Publication Analysis

Top Keywords

electrochemical sensor
28
electrochemical
9
nanocomposite based
8
formation silver
8
silver nanoparticles
8
nanoparticles fumed
8
fumed silica
8
sensor prepared
8
sensor
7
cbz
5

Similar Publications

Carcinoembryonic antigen (CEA) and C-reactive protein (CRP) are biomacromolecules known as cancer and inflammatory markers. Thus, they play a crucial role in early cancer diagnosis, post-treatment recurrence detection, and tumor risk assessment. This paper describes the development of an ultrasensitive and selective imprinted paper-based analytical device (PAD) as impedance sensor for determination of CEA and CRP in serum samples for point-of-care testing (POCT).

View Article and Find Full Text PDF

Exploring wood-derived biochar potential for electrochemical sensing of fungicides mancozeb and maneb in environmental water samples.

Talanta

January 2025

Department of Chemistry, Biochemistry and Environmental Protection, Faculty of Sciences, University of Novi Sad, Trg D. Obradovića 3, 21000, Novi Sad, Serbia.

The sustainable material, biochar (BC) from a hardwood source, was synthesized via pyrolysis process at 400 °C (BC400) and 700 °C (BC700) and used as a modifier during the electrochemical sensor design. The prepared BCs were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) analysis, and elemental analysis (CHNS). The development of rapid analytical techniques for detecting pesticides employing a low-cost carbon paste electrode (CPE) modified with BC is a novel strategy to provide a sensitive response to water pollution.

View Article and Find Full Text PDF

An integrated and multifunctional homemade cell sensor platform based on Si-d-CQDs and CRISPR-Cas12a for CD31 detection during endothelial-to-mesenchymal transition.

Talanta

January 2025

Department of Laboratory Medicine, Taihe hospital, Hubei University of Medicine, Shiyan, Hubei, 442000, China; Hubei Key Laboratory of Embryonic Stem Cell research, Hubei University of Medicine, Shiyan, 442000, Hubei, China; Clinical molecular diagnostic center, Taihe hospital, Hubei University of Medicine, Shiyan, Hubei, 442000, China. Electronic address:

Endothelial-to-mesenchymal transition (EndMT) plays a crucial role in the initiation and progression of atherosclerosis and various disease processes. Cluster of differentiation 31 (CD31) is a significant marker in EndMT. Detecting CD31 is essential for early-stage monitoring of EndMT and diagnosing atherosclerosis.

View Article and Find Full Text PDF

Flexible sweat sensors play a crucial role in health monitoring and disease prevention by enabling real-time, non-invasive assessment of human physiological conditions. Sweat contains a variety of biomarkers, offering valuable insights into an individual's health status. In this study, we developed an advanced flexible electrochemical sensor featuring reduced graphene oxide (rGO)-based electrodes, modified with a composite material comprising nitrogen and sulfur co-doped holey graphene (HG) and MXene, with in-situ-grown TiO nanoparticles on the MXene.

View Article and Find Full Text PDF

CuSeO@f-CNFs: A superoxide nanozyme for the selective nanomolar determination of the key cardiovascular biomarker, Glutathione.

Talanta

January 2025

International Ph. D Program in Innovative Technology of Biomedical Engineering & Medical Devices, Ming Chi University of Technology, New Taipei City 243303, Taiwan; Research Center for Intelligence Medical Devices, Ming Chi University of Technology, New Taipei City 243303, Taiwan. Electronic address:

Nanocomposites that mimic the characteristics of enzymes, commonly as nanozymes, can function as an efficient sensing material with high selectivity towards the targeted biological macromolecule. These nanozymes overcome of the challenges that arise when using natural enzymes as sensing material. This study presents a novel nanozyme, Copper Selenite (CuSeO) nanoparticles mounted on f-CNF, to electrochemically determine a potential cardiovascular biomarker, Glutathione (GSH).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!