Preparation and Characterization of Potato Starch Copolymers with a High Natural Polymer Content for the Removal of Cu(II) and Fe(III) from Solutions.

Cross-linked potato starch (StMBA) and starch-g-polyacrylamide materials with a high content of natural polymer from 60 to 90 wt.% (St60-St90) were synthesized by double chemical-chemical modification (grafting and cross-linking). Eco-friendly starch absorbents were tested for removal of Cu and Fe from aqueous solutions. The characteristics of the obtained materials (Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermal analysis (TGA), X-Ray Diffraction (XRD) and laser scanning microscopy (LSM)) confirmed their diversity in terms of composition and structure. The effect of ,'-Methylenebisacrylamide (MBA) and polyacrylamide (PAM) content in the starch graft copolymers, treatment time and concentration of metal ions on adsorption efficiency were investigated. The adsorption efficiency for StMBA was 14.0 mg Cu/g and 2.9 mg Fe/g, regardless of the initial concentration of ions, whereas for starch graft copolymer St60 it was 23.0 mg Cu/g and 21.2 mg Fe/g. Absorption of Fe(III) was persisted even after 2 days. Pseudo-second order model was used to investigate the adsorption mechanisms. It was found that in addition to the chemical adsorption of ions on the surface, there is sorption inside the polymer network and chelating mechanism may dominate. Satisfactory results were attributed to the adequate grafting of PAM onto starch, the ability to form complexes with metal cations and changes in material structure.