Development of a Dye-Based Device to Assess Poultry Meat Spoilage. Part I: Building and Testing the Sensitive Array.

The rationale behind the material and dye selection and the investigation of the properties of a solid-phase sensor array designed for following chicken meat spoilage is presented, having in mind that the final target must be the naked eye identification of the degradation steps. The device is obtained by fixing five acid-base indicators, -cresol purple (1), -cresol red (2), bromothymol blue (3), thymol blue (4), and chlorophenol red (5), and a sensing molecule specific for thiols, 5,5'-dithiobis(2-nitrodibenzoic acid), called Ellman's reagent, (6) on a commercial cellulose-based support. The dimensions of the sensor and the amount of dye sorbed on the solid are carefully studied. The preparation protocol to get reproducible sensing materials is established, based on the kinetic study and the color change investigation. The material stability and the capacity of changing color, according to the acid-base properties of the dyes, are tested. The sources of uncertainty, coming from the technique employed for signal data acquisition and treatment and from the intrinsic variability of the spots based on the commercial support, are established. The highest variability does not come from photo acquisition by a mobile phone, the effect of the illumination equipment, the partial least-squares (PLS) model employed to assess the amount of dye sorbed into the solid but from the variability of different spots and was found equal to 10%. The uncertainty is adequate for final employment since it is referred to as replicates under different conditions that are definitively judged almost always identical by naked eye evaluation, which is our last target for assessing a change of the colors associated with spoilage.