The current efficiency and color purity of organic light-emitting diodes (OLEDs) can be easily improved by means of a microcavity structure, but this improvement is typically accompanied by a deterioration in the characteristics of viewing angle. To minimize the angular dependence of the color characteristics exhibited by these strong microcavity devices, we investigated the changes in the optical properties of the green OLED with a bottom resonant structure. This investigation was based on varying the hole transport layer and semitransparent anode thicknesses. The results of optical simulations revealed that the current efficiency and viewing angle characteristics can be simultaneously improved by adjusting the thickness of the two layers. Furthermore, optical simulations predicted that the angular color dependence could be limited to 0.019 in the International Commission on Illumination (CIE) 1976 coordinate system. This optimum condition yielded a current efficiency of ∼134 cd/A. To further reduce this color shift, a nanosized island array (NIA) was introduced through the dewetting process of cesium chloride. By employing NIAs, the color coordinate shift value was reduced to 0.016 in the CIE 1976 coordinate system, and a current efficiency of 130.7 cd/A was achieved.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.403398 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Adjustment of Molecular Sorption Equilibrium on Catalyst Surface for Boosting Catalysis.
Acc Chem Res
January 2025
Key Lab of Biomass Chemical Engineering of Ministry of Education, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China.
ConspectusFor chemical reactions with complex pathways, it is extremely difficult to adjust the catalytic performance. The previous strategies on this issue mainly focused on modifying the fine structures of the catalysts, including optimization of the geometric/electronic structure of the metal nanoparticles (NPs), regulation of the chemical composition/morphology of the supports, and/or adjustment of the metal-support interactions to modulate the reaction kinetics on the catalyst surface. Although significant advances have been achieved, the catalytic performance is still unsatisfactory.
View Article and Find Full Text PDFEngineering Atom-Scale Cascade Catalysis via Multi-Active Site Collaboration for Ampere-Level CO Electroreduction to C Products.
Adv Mater
January 2025
International Collaborative Center on Photoelectric Technology and Nano Functional Materials, Institute of Photonics & Photon-Technology, Northwest University, Xi'an, 710069, P. R. China.
Electrochemical reduction of CO to value-added multicarbon (C) productions offers an attractive route for renewable energy storage and CO utilization, but it remains challenging to achieve high C selectivity at industrial-level current density. Herein, a MoCu single-atom alloy (SAA) catalyst is reported that displays a remarkable C Faradaic efficiency of 86.4% under 0.
View Article and Find Full Text PDFRecent Progress and Advances of Perovskite Crystallization in Carbon-Based Printable Mesoscopic Solar Cells.
Adv Mater
January 2025
Michael Grätzel Center for Mesoscopic Solar Cells Wuhan National Laboratory for Optoelectronics Key Laboratory of Materials Chemistry for Energy Conversion and Storage of Ministry of Education, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, P. R. China.
Carbon-based printable mesoscopic solar cells (p-MPSCs) offer significant advantages for industrialization due to their simple fabrication process, low cost, and scalability. Recently, the certified power conversion efficiency of p-MPSCs has exceeded 22%, drawing considerable attention from the community. However, the key challenge in improving device performance is achieving uniform and high-quality perovskite crystallization within the mesoporous structure.
View Article and Find Full Text PDFCopper Tantalate by a Sodium-Driven Flux-Mediated Synthesis for Photoelectrochemical CO Reduction.
Small Methods
January 2025
Liquid Sunlight Alliance, Lawrence Berkeley National Laboratory, 1 Cyclotron Rd, Berkeley, CA, 94720, United States.
Copper-tantalate, CuTaO (CTO), shows significant promise as an efficient photocathode for multi-carbon compounds (C) production through photoelectrochemical (PEC) CO reduction, owing to its suitable energy bands and catalytic surface. However, synthesizing CTO poses a significant challenge due to its metastable nature and thermal instability. In this study, this challenge is addressed by employing a flux-mediated synthesis technique using a sodium-based flux to create sodium-doped CTO (Na-CTO) thin films, providing enhanced nucleation and stabilization for the CTO phase.
View Article and Find Full Text PDFResolving tissue complexity by multimodal spatial omics modeling with MISO.
Nat Methods
January 2025
Statistical Center for Single-Cell and Spatial Genomics, Department of Biostatistics, Epidemiology and Informatics, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA, USA.
Spatial molecular profiling has provided biomedical researchers valuable opportunities to better understand the relationship between cellular localization and tissue function. Effectively modeling multimodal spatial omics data is crucial for understanding tissue complexity and underlying biology. Furthermore, improvements in spatial resolution have led to the advent of technologies that can generate spatial molecular data with subcellular resolution, requiring the development of computationally efficient methods that can handle the resulting large-scale datasets.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!