Monitoring milk quality is of fundamental importance in food industry, because of the nutritional value and resulting position of milk in daily diet. The detection of small nutrients and toxins in milk is challenging, considering high sample complexity and low analyte abundance. In addition, the slow analysis and tedious sample preparation hinder the large-scale application of conventional detection techniques. Herein, zirconia hybrid nanoshells are constructed to enhance the performance of laser desorption/ionization mass spectrometry (LDI MS). Zirconia nanoshells with the optimized structures and compositions are used as matrices in LDI MS and achieve direct analysis of small molecules from 5 nL of native milk in ≈1 min, without any purification or separation. Accurate quantitation of small nutrient is achieved by introducing isotope into the zirconia nanoshell-assisted LDI MS as the internal standard, offering good consistency to biochemical analysis (BCA) with R = 0.94. Further, trace toxin is enriched and identified with limit-of-detection (LOD) down to 4 pm, outperforming the current analytical methods. This work sheds light on the personalized design of material-based tool for real-case bioanalysis and opens up new opportunities for the simple, fast, and cost-effective detection of various small molecules in a broad field.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/smll.202003902 | DOI Listing |
Dent J (Basel)
December 2024
Department of Implant-Prosthetic Therapy, Faculty of Dentistry, "Carol Davila" University of Medicine and Pharmacy, 050474 Bucharest, Romania.
Full-arch zirconia restorations on implants have gained popularity due to zirconia's strength and aesthetics, yet they are still associated with challenges like structural fractures, peri-implant complications, and design misfits. Advances in CAD/CAM and digital workflows offer potential improvements, but a technique that consistently addresses these issues in fixed, full-arch, implant-supported prostheses is needed. This novel technique integrates a facially and prosthetically driven treatment approach, which is divided into three phases: data acquisition, restoration design, and manufacturing/delivery.
View Article and Find Full Text PDFJ Mech Behav Biomed Mater
December 2024
Department of Biomaterials Science and Turku Clinical Biomaterial Center -TCBC, Institute of Dentistry, University of Turku, Finland; Research Development and Production Department, Stick Tech Ltd-Member of GC Group, Turku, Finland.
Objectives: The aim of this study was to evaluate the margin quality of anterior crowns made of experimental short fiber-reinforced CAD/CAM composite (SFRC CAD) block before and after cyclic fatigue aging. Moreover, to investigate the microstructure, homogeneity, and porosity of the SFRC CAD compared with other commercial CAD/CAM materials.
Methods: 40 anterior crowns were milled from five CAD/CAM blocks divided into five groups (n = 8/group).
Microsc Res Tech
December 2024
Department of Restorative Dentistry, Marmara University Faculty of Dentistry, Istanbul, Turkey.
This study evaluated the effects of immediate dentin sealing (IDS) using different universal adhesives on microtensile bond strength (μTBS) of pretreated monolithic translucent tetragonal polycrystalline zirconia-based CAD/CAM restoration to dentin and microscopic morphological alterations. Mid-coronal dentin were obtained from 32 human molars and randomly allocated into 8 groups according to the presence/absence of IDS, universal adhesives for IDS (Single Bond Universal/SBU, Clearfil Quick Bond/CUQ, Optibond Universal/OBU) and zirconia surface pretreatments (tribochemical silica coating-30 μm CoJet particles/TSC, sandblasting-50 μm AlO/SB): Group TSC, Group TSC+SBU, Group TSC+CUQ, Group TSC+OBU, Group SB, Group SB+SBU, Group SB+CUQ, Group SB+OBU. CAD/CAM restorations (Lava Plus High Translucency Zirconia Disc) were produced, luted, and subjected to 10.
View Article and Find Full Text PDFBMC Oral Health
November 2024
Pediatric Dentistry Department, Faculty of Dentistry, Mansoura University, Mansoura, Egypt.
Background: Primary tooth wear is a common phenomenon that affects chewing ability, dental sensitivity, aesthetics, and occlusion. This study was conducted to compare the antagonistic enamel wear of primary molars opposed to four different crown materials.
Methods: Forty lower second primary molars of children aged 4-8 years were allocated into 4 groups: Group 1 (n = 10): received stainless steel crowns; Group 2 (n = 10): received prefabricated commercially available zirconia crowns (NuSmile); Group 3 (n = 10): received locally manufactured zirconia crowns created via the CAD/CAM system; and Group 4 (n = 10): received locally manufactured hybrid ceramic (Vita Enamic) crowns created via the CAD/CAM system.
Cureus
October 2024
Prosthetic Dentistry, Carol Davila University of Medicine and Pharmacy, Bucharest, ROU.
Purpose This study aimed to evaluate the impact of substrate material, esthetic material type and thickness, and cement shade on the final color reproduction of implant-supported fixed restorations. The goal was to identify optimal combinations for achieving clinically acceptable esthetic outcomes. Material and methods An in vitro study was conducted using four substrate materials, hybrid polyetherketoneketone (PEEK)-based ceramic-reinforced polymer (BioHPP), chromium-cobalt alloy (CrCo), grade 5 titanium (Ti), and white zirconium oxide ceramic (WZirCAD), and three esthetic materials, lithium disilicate ceramic (e.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!