New composites containing a natural filler made of diatom shells (frustules), permitting the modification of polylactide matrix, were produced by Fused Deposition Modelling (3D printing) and were thoroughly examined. Two mesh fractions of the filler were used, one of <40 µm and the other of 40-63 µm, in order to check the effect of the filler particle size on the composite properties. The composites obtained contained diatom shells in the concentrations from 0% to 5% wt. (0-27.5% vol.) and were subjected to rheological analysis. The composites obtained as filaments of 1.75 mm in diameter were used for 3D printing. The printed samples were characterized as to hydrophilic-hydrophobic, thermal and mechanical properties. The functional parameters of the printed objects, e.g., mechanical characteristics, stability on contact with water and water contact angle, were measured. The results revealed differences in the processing behavior of the samples as well as the effect of secondary granulation of the filler on the parameters of the printing and mechanical properties of the composites.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7603044 | PMC |
| http://dx.doi.org/10.3390/ma13204632 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of Diatomite Application on the Removal of Biogenic Pollutants in Rain Gardens.
Materials (Basel)
December 2024
Faculty of Electrical and Computer Engineering, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland.
Due to its structure and properties, diatomite from a deposit in Jawornik Ruski (Subcarpathian Voivodeship) can be used as a sorbent in rain gardens. The purpose of the current research is to analyze how enriching the substrate used in a rain garden with diatomite can affect the removal of biogenic pollutants. This study was carried out under laboratory conditions using retention columns, two experimental columns with different contents of diatomite, and a control column without the addition of diatomite.
View Article and Find Full Text PDFApplication of response surface methodology (RSM) for experimental optimization in biogenic silica extraction from rice husk and straw ash.
Sci Rep
January 2025
Department of Chemical Engineering, Bahir Dar Institute of Technology, Bahir Dar University, P.O. Box 26, Bahir Dar, Ethiopia.
This work aimed to extract silica from combination of rice husk (RH and Rice straw (RS) by optimizing the ash digesting process parameters with the aid of response surface methodology (RSM). The effects of three independent ash digestion process factors like sodium hydroxide concentration (1-3 M), temperature (60-120 °C) and time (1-3 h), for silica production from the mixture of rice husk (RH) and rice straw (RS) were studied. A quadratic model was used to correlate the interaction effects of the independent variables for maximum silica production at the optimum process parameters by employing central composite design (CCD) with RSM.
View Article and Find Full Text PDFMolecular insights into the composition, sources, and aging of atmospheric brown carbon.
Chem Soc Rev
January 2025
Department of Chemistry, Purdue University, West Lafayette, Indiana, 47906, USA.
The light-absorbing chemical components of atmospheric organic aerosols are commonly referred to as Brown Carbon (BrC), reflecting the characteristic yellowish to brown appearance of aerosol. BrC is a highly complex mixture of organic compounds with diverse compositions and variable optical properties of its individual chromophores. BrC significantly influences the radiative budget of the climate and contributes to adverse air pollution effects such as reduced visibility and the presence of inhalable pollutants and irritants.
View Article and Find Full Text PDFDiversity and future perspectives of Mediterranean deep-water oyster reefs.
Sci Rep
December 2024
Institute of Marine Sciences, National Research Council (CNR-ISMAR), Bologna, Italy.
Anthropogenic and climate factors are increasingly affecting the composition and functions of many marine biogenic reefs globally, leading to a decline in associated biodiversity and ecosystem services. Once dominant ecological component, modern oyster reefs in the Mediterranean and Black Sea and the Atlantic Ocean have already been profoundly altered by overharvesting, habitat loss and the introduction of alien species. Far less known are deep-water oyster reefs, which can however form substantial biogenic structures below 30 m depth.
View Article and Find Full Text PDFHemostatic Antimicrobial Hydrogels Based on Silicon, Iron, Zinc, and Boron Glycerolates for Wound Healing Applications.
Gels
December 2024
Postovsky Institute of Organic Synthesis, Ural Branch of the Russian Academy of Sciences, 620108 Ekaterinburg, Russia.
The use of glycerolates of biogenic elements as biocompatible precursors in sol-gel synthesis is an innovative direction and opens up new scientific and practical prospects in chemistry and technology of producing practically important biomedical materials, including hemostatic, antimicrobial, and wound healing materials. Using biocompatible precursors, silicon, zinc, boron, and iron glycerolates, new bioactive nanocomposite hydrogels were obtained by the sol-gel method. The composition and structural features of the hydrogels were studied using a complex of modern analytical techniques, including TEM, XRD, AES, and ESI MS.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!