Floc structure plays an important role in the separation of coal wastewater. In this study, a camera-based method is used to evaluate quantitatively the structural characteristics of flocs generated by different coagulants and flocculants. The correlations between particle size, settlement velocity and effective density of coal tailings flocs are analysed. The results show that the statistical settling velocity increases linearly with floc size, while the effective density decreases with increase in floc size. Different flocculation mechanisms lead to diverse growth abilities of flocs. When the flocculant is used alone, the quality of the flocs generated by the flocculants, cationic polyacrylamide (CPAM) and non-ionic polyacrylamide (NPAM), is better than that generated by anionic polyacrylamide (APAM). However, the combination of trivalent cations and APAM yields a much better effect than that obtained using CPAM and NPAM. Flocs become larger and more compact when treated with a coagulant combined with a flocculant.

Download full-text PDF

Source
http://dx.doi.org/10.2166/wst.2020.385DOI Listing

Publication Analysis

Top Keywords

floc size
12
effective density
12
size effective
8
flocculation mechanisms
8
flocs generated
8
flocs
5
characterisation floc
4
size
4
density sedimentation
4
sedimentation flocculation
4

Similar Publications

Simultaneous removal of Microcystis aeruginosa and microplastics by oxidation enhanced coagulation.

Environ Pollut

December 2024

Department of Environmental Science and Engineering, Fudan University, Shanghai, 200433, China; Department of Civil and Environmental Engineering, National University of Singapore, 10 Kent Ridge, 119260, Singapore. Electronic address:

The composite pollution is an increasingly severe challenge in the field of water treatment. Especially, microplastics (MPs) contamination and Microcystis aeruginosa (M. aeruginosa) were verified that they could synergistically pose a serious threat to safety of drinking water.

View Article and Find Full Text PDF

Micropollutants removal from aquaculture water using layer-by-layer self-assembled nanofiltration membranes.

Water Res

December 2024

Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, 201210, China; University of Chinese Academy of Sciences, Beijing, 100049, China. Electronic address:

Micropollutants (MPs) in aquaculture water are directly related to human health, but largely overlooked. The conventional water treatment technologies could not effectively remove MPs, and new technologies have been pursued with high MP removal rate, low cost and small footprint. This paper reported the first endeavor of using layer-by-layer (LBL) hollow fiber (HF) nanofiltration (NF) membranes to treat real aquaculture water.

View Article and Find Full Text PDF

New insight of biophysical aggregates' geometric distributions from side and bottom views during their flocculation and settling in saline water.

Water Res

December 2024

School of Marine Sciences, Sun Yat-sen University, Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai), Zhuhai, Guangdong 519082, China.

Article Synopsis
  • Biophysical mud aggregates, made of clay minerals and extracellular polymeric substances (EPS), are essential for water quality and aquatic ecosystems, but their complex shapes and settling behaviors in saline water are not well understood.
  • A new dual-view method using an inverted microscope and side camera was developed to take detailed images of these aggregates from different angles, revealing that bottom-view images offer better insights into their geometric properties during settling.
  • The study found that flocs made from clay-EPS mixtures are larger and more irregular than those made from pure clay, with EPS promoting stability in larger flocs during turbulence, indicating that models of flocculation need to consider organic materials and use a multi-perspective approach for better accuracy.
View Article and Find Full Text PDF

Multiscale assessment of the effect of a stearic-palmitic sucrose ester on the crystallization of anhydrous milk fat.

Food Res Int

December 2024

Food Structure & Function Research Group, Department Food Technology, Safety and Health, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, 9000 Ghent, Belgium.

Anhydrous milk fat (AMF) is a flavorful, but particularly complex fat containing a wide variety of fatty acids (FAs) and triglycerides (TGs), resulting in an extended melting range of -40 °C to 40 °C. The functionality of this fat can be steered by the addition of sucrose esters (SEs). In this study, the crystallization behavior of AMF in the presence of a stearic-palmitic SE was assessed.

View Article and Find Full Text PDF

The ability of some cationic pullulan (TMAP-P) and curdlan (TMAP-C) derivative to remove different fungicide particles from synthetic wastewater has been studied. Commercial fungicides formulations of different type, Bordeaux mixture (BM), Dithan M45 (Dt) and Melody Compact49 WG (MC) have been used. The influence of some parameters related to the dispersion characteristics (suspension pH and salinity) and the polysaccharide derivatives (polymer dose, the ionic groups content, flexibility) on the separation process have been assessed.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!