Influence of the integrity of tendinous membrane and fascicle on biomechanical characteristics of tendon-derived scaffolds.

Biomed Mater

Laboratory of Stem Cell and Tissue Engineering, State Key Laboratory of Biotherapy, West China Hospital, Sichuan University, Chengdu 610041, People's Republic of China.

Published: December 2020

AI Article Synopsis

  • The study focuses on the biomechanical properties of tendon grafts, specifically comparing decellularized tendon slices (DTSs) and decellularized bovine tendon sheets (DBTSs) for tendon reconstruction surgery.
  • It was found that DBTSs maintained complete tendinous membranes while DTSs had incomplete structures, affecting their mechanical properties.
  • The results suggest that while DTSs can serve as a patch for tendon repairs, DBTSs are better suited as bridging materials for larger tendon defects.

Article Abstract

The biomechanical characteristics of tendon grafts is essential for tendon reconstructive surgery due to its great role in providing a good mechanical environment for tendon healing and regeneration. In our previous studies, the decellularized tendon slices (DTSs) and decellularized bovine tendon sheets (DBTSs) scaffolds were successfully developed. However, the influence of the integrity of tendinous membrane (endotenon and epitenon) and fascicle on biomechanical characteristics of these two scaffolds was not investigated. In this study, we assessed the integrity of tendinous membrane and fascicle of the tendon derived scaffolds and its effect on the biomechanical characteristics. The results of histological staining indicated that the DBTSs had complete endotenon and epitenon, while DTSs had no epitenon at all, only part of endotenon was remained. Furthermore, the DBTSs, and DTSs with thickness of 900 μm had complete fascicles, while DTSs with thickness less than 600 μm had almost no complete fascicles. The fibrous configuration of epitenon was well-preserved in the surface of the DBTSs but the surface ultrastructure of the DTSs was aligned collagen fibers based on scanning electron microscopy examination. The results of transmission electron microscopy showed that there was no significant difference between the DBTSs and DTSs. Mechanically, the DBTSs and DTSs with thickness of 900 μm showed similar ultimate tensile strength and stiffness to native tendon segments (NTSs). The strain at break and suture retention strength of the DBTSs showed much higher than that of the DTSs (p < 0.05). Additionally, the DBTSs showed higher ultimate load than the DTSs when these scaffolds were sutured with NTSs (p < 0.05) through the modified Kessler technique based on a uniaxial tensile test. This study demonstrated that DTSs may be used as a patch for reinforcing tendon repair, while DBTSs may be used as a bridge for reconstructing tendon defects.

Download full-text PDF

Source
http://dx.doi.org/10.1088/1748-605X/abc203DOI Listing

Publication Analysis

Top Keywords

biomechanical characteristics
16
integrity tendinous
12
tendinous membrane
12
dbtss dtss
12
dtss thickness
12
dtss
10
tendon
9
dbtss
9
influence integrity
8
membrane fascicle
8

Similar Publications

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!