Crack healing has been studied extensively to protect reinforced concrete structures from the ingress of harmful ions. Research examining the regain in the mechanical properties of self-healing composites has focused mostly on the computation of the healing ratio based on the measurement of the tensile and compressive strengths but with poor regard for the flexural performance. However, the regain in the flexural performance should also be investigated for design purposes. The present study performs flexural testing on reinforced concrete members using crushed clinker binder and aggregates as well as crystalline admixtures as healing agents. Healing ratios of 100% for crack widths smaller than 200 μm and 85% to 90% for crack widths of 250 μm were observed according to the admixing of clinker binder and aggregates. Water flow test showed that the members replacing binder by 100% of clinker achieved the best crack healing performance. The crack healing property of concrete improved to some extent the rebar yield load, the members' ultimate load and energy absorption capacity and ductility index. The crack distribution density from the observed crack patterns confirmed the crack healing effect provided by clinker powder. The fine grain size of clinker made it possible to replace fine aggregates and longer healing time increased the crack healing effect.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7600473 | PMC |
http://dx.doi.org/10.3390/ma13204516 | DOI Listing |
Sci Data
January 2025
Department of Civil & Geotechnical Engineering and Geomechanics, AGH University of Krakow, al.Mickiewicza 30, 30-059, Krakow, Poland.
The presented dataset comes from an experimental study on the autogenous self-healing of high-strength concrete and the development of deep learning metasensor for crack width assessment and self-healing evaluation. Concrete specimens were prepared, matured, cracked, and exposed to self-healing. High-resolution scanning of the specimen surface and scale-invariant image processing were performed, multiple grid lines crossing cracks were established, and brightness degree profiles along grid lines were extracted.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Division of Smart Construction and Environmental Engineering, Daejin University, Pocheon 11159, Republic of Korea.
This study investigates the quality characteristics and healing performance of precast concrete incorporating self-healing technology, with the aim of supporting smart city implementation. To enhance the self-healing capabilities of concrete, hybrid self-healing capsules, combining solid capsules and liquid capsules, were utilized, and their applicability and practicality were assessed. The findings revealed that incorporating hybrid self-healing capsules into precast concrete resulted in a reduction in slump by up to 14% and air content by up to 9%.
View Article and Find Full Text PDFSheng Wu Gong Cheng Xue Bao
January 2025
College of Biotechnology and Bioengineering, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China.
Concrete is widely used in building construction, civil engineering, roads, bridges, etc., but concrete cracking remains a major issue in the engineering industry. To develop an effective and feasible concrete repair technology, this study combined microbial and microencapsulation technologies to prepare a multi-layer compound microcapsule using the piercing method.
View Article and Find Full Text PDFJ Prosthodont
January 2025
Department of Community Medicine and Health Care, University of Connecticut Health Center, Farmington, Connecticut, USA.
Purpose: The primary objective of this retrospective study was to evaluate the survival outcomes of immediately loaded acrylic resin complete arch fixed implant-supported prosthesis (CAFIP) fabricated from the denture conversion protocol. The secondary objective was to evaluate the early implant survival outcomes associated with these prostheses.
Material And Methods: A retrospective chart review was conducted to study the clinical outcomes data of immediately loaded conversion prostheses and immediately loaded implants.
Chem Commun (Camb)
January 2025
Department of Applied Chemistry, Faculty of Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555, Japan.
Self-healable, multilayered organosiloxane films were prepared thermal conversion of lamellar organosiloxane films containing poly(ethylene oxide)-polydimethylsiloxane-poly(ethylene oxide) block copolymers. The incorporation of silanolate groups enabled crack healing through dynamic siloxane equilibration. The enhanced hardness and suppressed cyclic siloxane formation resulting from the multilayered structure exhibit potential for practical applications.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!