Biodegradable all-cellulose composite membranes for simultaneous oil/water separation and dye removal from water.

Carbohydr Polym

State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute at Sichuan University, Chengdu 610065, China; Advanced Polymer Materials Research Center of Sichuan University, Shishi 362700, China. Electronic address:

Published: December 2020

While of enormous scientific interests, the super-wetting materials capable of one-step separation of oils and dyes from water are rare on the market. Besides, the disposal of the used materials themselves is still a challenge, mainly ascribed to their non-biodegradation. Herein, we report an all-cellulose composite membrane that can simultaneously remove oil and dye from water. The membrane was fabricated via a simple dip-coating process during which the filter paper was coated by a cellulose hydrogel layer. This cellulose hydrogel coating was discovered to play an essential role in the separation of oil/water emulsion. Meanwhile, the incorporation of citric acid remarkably improved the mechanical and adsorption properties of the membrane as it served as both the crosslinking agent and the active species for methylene blue adsorption. This work demonstrated a new strategy on the development of fully biodegradable materials for both high-efficiency oil/water separation and dye removal.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.carbpol.2020.116872DOI Listing

Publication Analysis

Top Keywords

all-cellulose composite
8
oil/water separation
8
separation dye
8
dye removal
8
cellulose hydrogel
8
biodegradable all-cellulose
4
composite membranes
4
membranes simultaneous
4
simultaneous oil/water
4
separation
4

Similar Publications

Alkaline-Acidic Sodium Chlorite Pretreatment of Bamboo Powder for Preparation of Excellent Mechanical, Transparent, and Biodegradable Films.

Polymers (Basel)

November 2024

Key Laboratory of Advanced Functional Materials, Institute of Advanced Energy Materials and Devices, Ministry of Education, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China.

Bamboo is widely distributed around the world as an excellent renewable resource. However, the structural and morphological changes in the bamboo samples in extracting bamboo cellulose fiber using alkaline-acidic sodium chlorite are unclear, and the potential for preparation of cellulose packaging films is yet to be explored. In this paper, the changes in micro-morphology, chemical structure, and pyrolytic behavior of moso bamboo powder during alkaline and acidic sodium chlorite pretreatment were intensively investigated.

View Article and Find Full Text PDF
Article Synopsis
  • Plant-derived nanovesicles (BNVs) have great potential as biotherapeutics and functional food ingredients, but their large-scale isolation, purification, and storage are challenging.
  • The study introduces a new method using composite all-cellulose membranes that selectively capture and stabilize BNVs through electrostatic and size-exclusion filtration.
  • This method allows for the efficient production, purification, and release of BNVs while maintaining their bioactivity, making it promising for therapeutic applications.
View Article and Find Full Text PDF

All-cellulose composite yarn via welding engineering.

Carbohydr Polym

November 2024

Key Lab of Science and Technology of Eco-textile, Ministry of Education, College of Chemistry and Chemical Engineering, Donghua University, Shanghai 201620, China; Shanghai Belt and Road Joint Laboratory of Textile Intelligent Manufacturing, Donghua University, Shanghai 201620, China. Electronic address:

Due to the wide range of available raw materials and excellent biocompatibility, all-cellulose composites (ACCs) have received significant attention as a kind of renewable and biodegradable candidate to replace petroleum-based synthetic polymers. However, most current research of ACCs is limited to film and bulk materials. Herein, we present a simple, efficient, and scalable welding method for obtaining green, self-reinforced, high performance all-cellulose composite yarns by partially dissolving and regenerating cellulose yarns with phosphoric acid.

View Article and Find Full Text PDF

The increasing awareness of global ecological concerns and the rising sustainability consciousness associated with the manufacturing of non-renewable and non-biodegradable composite materials have led to extensive research on product and process developments of more sustainable, environmentally friendly, and fully biodegradable biocomposites for higher-value end-use applications. All-cellulose composites (ACCs) are an emerging class of biocomposites, which are produced utilizing solely cellulose as a raw material that is derived from various renewable biomass resources, such as trees and plants, and are assessed as fully biodegradable. In this study, sustainable ACCs were fabricated for the first time based on the full dissolution of commercially available sulfite dissolving (D) pulps as a matrix with concentrations of 1.

View Article and Find Full Text PDF

Biopolymer-based functional materials are essential for reducing the carbon footprint and providing high-quality lightweight materials suitable for packaging and thermal insulation. Here, cellulose nanocrystals (CNCs) were efficiently upcycled from post-consumer cotton clothing by TEMPO-mediated oxidation and HCl hydrolysis with a yield of 62% and combined with wood cellulose nanofibrils (CNFs) to produce anisotropic foams by unidirectional freeze-casting followed by freeze drying (FD) or supercritical-drying (SCD). Unidirectional freeze-casting resulted in foams with aligned macropores irrespective of the drying method, but the particle packing in the foam wall was significantly affected by how the ice was removed.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!