Currently, there are no regulatory guidelines indicating spacer devices/valved holding chamber (VHC) should be used routinely during pulmonary function tests, and few studies evaluated if spacer devices reduce beta-agonist bronchodilators' side effects. A prospective study compared salbutamol's cardiovascular effects and bronchodilation response during spirometry tests with and without a spacer device/VHC. Heart rate (HR), the corrected QT interval (QTc), and systolic and diastolic blood pressure were measured 10 minutes after the first spirometry test, before the drug administration, and 20 minutes after inhalation in both groups. Spirometric parameters (forced expiratory volume in the first second [FEV1], forced vital capacity [FVC], and FEV1/FVC) were also measured for both groups. HR and QTc increase were significantly higher in the pressurized meter dose inhalers alone group versus the VHC group [mean SD] [73.1 ± 10 bpm to 74.3 + 10 bpm, = 0.021] and [median (25%-75% interquartile range)] [389 ms (381-404) to 398 ms (387-407), = 0.045] vs. [mean SD] [75.4 ± 9 to 73.8 + 8 bpm, = 0.4] and [median (25%-75% interquartile range)] [388 ms (347-408) to 385 ms (366-408), = 0.35], respectively. FEV1 variation before and after salbutamol were similar between both groups. Although VHC significantly reduces HR and QTc variation when using beta-agonist bronchodilators in healthy patients, no clinical repercussions of this variation were found in this study, since no event of tachycardia or pathological QTc was recorded. VHC has a diminished clinical impact for healthy patients when considering cardiovascular effects and spirometric parameters. Beta-agonist bronchodilators may be administrated despite the use of spacer devices in patients without known cardiovascular diseases. Its significance for other populations still needs to be determined.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1089/jamp.2019.1591 | DOI Listing |
ACS Appl Mater Interfaces
January 2025
Department of Microelectronic Science and Engineering, School of Physical Science and Technology, Ningbo University, Ningbo 315211, China.
Two-dimensional (2D) Ruddlesden-Popper perovskites (RPPs) have garnered significant attention due to their enhanced stability compared with their three-dimensional counterparts. However, the power conversion efficiency (PCE) of 2D perovskite solar cells (2D-PSCs) remains lower than that of 3D-PSCs. Understanding the microstructural evolution of 2D perovskite films during fabrication is essential for improving their performance.
View Article and Find Full Text PDFSmall
January 2025
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, China.
2D perovskite has demonstrated great potential for application in photovoltaic devices due to the tunable energy bands, suppressed ion migration, and high stability. However, 2D perovskite solar cells (PSCs) display suboptimal efficiency in comparison to 3D perovskite solar cells, which can be attributed to the quantum confinement and dielectric confinement effects resulting from the intercalation of organic spacer cations into the perovskite lattice. This review starts with the fundamental structural characteristics, optoelectronic properties, and carrier transport dynamics of 2D PSCs, followed by the discussion of approaches to improve the photovoltaic performance of 2D PSCs, including the manipulation of crystal orientation, phase distribution, pure phase, organic layer, and device engineering.
View Article and Find Full Text PDFAm J Sports Med
January 2025
Department of Sports Medicine, Peking University Third Hospital, Institute of Sports Medicine of Peking University, Beijing, China.
Top Curr Chem (Cham)
December 2024
Department of Chemistry, King Khalid University, P.O. Box 9004, 61413, Abha, Saudi Arabia.
Carbazoles are nitrogen-containing aromatic heterocycles, having widespread applications in the field of photovoltaics. Carbazole-based photosensitizers have tunable features for absorption on semi-conductor (tellurium dioxide or zinc oxide) layers to create sufficient push-pull force in the conversion of sunlight into electrical energy, thus presenting as promising heterocyclic donor candidates to be used in dye-sensitized solar cells. For the synthesis of these dyes, various structural designs are available, namely, D-A, D-π-A, D-D-π-A, D-A-π-A, A-π-D-π-A-π-A, and D2-π-A that all involve incorporating carbazole as a donor (D), along with spacer (π-extender) moieties, such as thiophene, phenol, ethynylene, nitromethane, azine, thiadiazole, or acetonitrile.
View Article and Find Full Text PDFSci Rep
December 2024
Department of Electronics, Carleton University, Ottawa, ON, K1S 5B6, Canada.
In this paper, we propose a novel structure of anisotropic graphene-based hyperbolic metamaterial (AGHMM) sandwiched as a defect between two one-dimensional photonic crystals (PCs) in the terahertz (THz) region. The proposed structure is numerically simulated and analyzed using the transfer matrix method, effective medium theory and three-dimensional finite-difference time-domain. The defect layer of AGHMM consists of graphene sheets separated by subwavelength dielectric spacers.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!