III-Nitrides Resonant Cavity Photodetector Devices.

III-nitride resonant cavity-enhanced Schottky barrier photodetectors were fabricated on 2 µm thick GaN templates by radio frequency plasma-assisted molecular beam epitaxy. The optical cavity was formed by a bottom distributed Bragg reflector based on 10 periods of AlGaN/GaN, an Au-based Schottky contact as top mirror, and an active zone of 40 nm-thick GaN layer. The devices were fabricated with planar geometry. To evaluate the main benefits allowed by the optical cavity, conventional Schottky photodetectors were also processed. The results revealed a planar spectral response for the conventional photodetector, unlike the resonant devices that showed two raised peaks at 330 and 358 nm with responsivities of 0.34 and 0.39 mA/W, respectively. Both values were 80 times higher than the planar response of the conventional device. These results demonstrate the strong effect of the optical cavity to achieve the desired wavelength selectivity and to enhance the optical field thanks to the light resonance into the optical cavity. The research of such a combination of nitride-based Bragg mirror and thin active layer is the kernel of the present paper.