Thermogravimetric analysis (TGA) was employed to investigate the thermal stability of asphaltenes at different environments (inert and oxidizing atmosphere) and identify their refractory nature. TGA and differential scanning calorimetry were carried out at a temperature range of 50-700 °C, for asphaltene samples obtained from atmospheric residues, vacuum residues (VRs), and aromatic petroleum pitch samples, which were obtained from the cracking of VRs at different temperatures. The TGA results clearly indicate that thermal degradation of asphaltene takes place in a single process that starts around 350 °C and ends at 500 °C, giving ash contents of less than 2%. The derivatives of the TGA for the asphaltene samples suggest that the weight loss of composite material took place in two steps. The first step corresponds to the degradation of aliphatic side chains or easily oxidized hydrocarbons, while the second step corresponds to the degradation of the aromatic sheets or the stacked layers. TGA of asphaltenes in oxidizing atmosphere showed considerable changes in heat flow due to the destructive oxidation of the asphaltene molecular structure. The thermal stability or refractory nature of these asphaltenes have been calculated as heat of energy or enthalpy of the molecule, which corresponds to the π-π interaction between the aromatic ring, hydrogen bonding, and alkyl chain size of the asphaltene molecule.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7528301PMC
http://dx.doi.org/10.1021/acsomega.0c02792DOI Listing

Publication Analysis

Top Keywords

thermal stability
8
oxidizing atmosphere
8
refractory nature
8
asphaltene samples
8
step corresponds
8
corresponds degradation
8
tga
5
asphaltene
5
pyrolysis asphaltenes
4
asphaltenes derived
4

Similar Publications

Germanium is known to occupy tetrahedral sites by substituting silicon in germanosilicate zeolites. In this study, we present pioneering findings regarding the synthesis of zeolites with an MFI structure (GeMFI) incorporating a high germanium amount (16% Ge). Remarkably, the germanium atoms feature a slight electron deficiency with respect to GeO, and the typical coordination number of 4, as usually reported for the germanosilicate zeolites, is exceeded, giving rise to Ge dimers in a double-bridge configuration.

View Article and Find Full Text PDF

The incorporation of a glassy material into a self-assembled nanoparticle (NP) film can produce highly loaded nanocomposites. Reduction of the NP diameter can lead to extreme nanoconfinement of the glass, significantly affecting the thermal and physical properties of the nanocomposite material. Here, we investigate the photostability and photodegradation mechanisms of molecular nanocomposite films (MNCFs) produced from the infiltration of indomethacin (IMC) molecules into self-assembled films of silica NPs (11-100 nm in diameter).

View Article and Find Full Text PDF

Rational Electrolyte Design for Elevated-Temperature and Thermally Stable Lithium-Ion Batteries with Nickel-Rich Cathodes.

ACS Appl Mater Interfaces

January 2025

Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99354, United States.

As the energy density of lithium-ion batteries (LIBs) increases, the shortened cycle life and the increased safety hazards of LIBs are drawing increasing concerns. To address such challenges, a series of localized high-concentration electrolytes (LHCEs) based on a solvating-solvent mixture of tetramethylene sulfone and trimethyl phosphate and a high flash-point diluent 1H,1H,5H-octafluoropentyl 1,1,2,2-tetrafluoroethyl ether were designed. The LHCEs exhibited nonflammability and greatly suppressed heat release at elevated temperatures, which would potentially improve the safety performance of the LIBs.

View Article and Find Full Text PDF

Comparative Study of Iminodibenzyl and Diphenylamine Derivatives as Hole Transport Materials in Inverted Perovskite Solar Cells.

Chemistry

January 2025

Friedrich-Alexander-Universität Erlangen-Nürnberg: Friedrich-Alexander-Universitat Erlangen-Nurnberg, Department of Materials Science and Engineering, Institute of Materials for Electronics and Energy Technology (i-MEET), Martensstraße 7, 91058, Erlangen, GERMANY.

Perovskite solar cells (PSCs) have recently achieved over 26% power conversion efficiency, challenging the dominance of silicon-based alternatives. This progress is significantly driven by innovations in hole transport materials (HTMs), which notably influence the efficiency and stability of PSCs. However, conventional organic HTMs like PTAA, although highly efficient, suffer from thermal degradation, moisture ingress, and high cost.

View Article and Find Full Text PDF

Aminobenzoic Acid Covalently Modified Polyoxotungstates Based on {XW} Clusters with Proton Conductivity Property.

Inorg Chem

January 2025

Henan Key Laboratory of Polyoxometalate Chemistry, College of Chemistry and Molecular Sciences, Henan University, Kaifeng, Henan 475004, P. R. China.

Three cases of aminobenzoic acid hybrid polyoxotungstates, Na(HO)[(HPWO) (OCCHNH)]·7HO (), K(HO)[(AsWO)(OCCHNH)]·4HO (), and [(HN(CH)]Na(HO)[(SbWO) (OCCHNH)]·7HO (), were successfully synthesized. This is the first report of the successful assembly of the hexanuclear {XW} (X = HP, As, or Sb) clusters and organic carboxylic acid (para aminobenzoic acid) ligands. All three hybrids feature a common {XW} unit composed of a six-membered {WO} octahedral ring capped by one {XO} trigonal pyramid.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!