Background: Fracture of femoral component in total knee arthroplasty (TKA) has become a rare complication with improvements in metal alloy manufacturing technology.
Methodology: We report two cases of fracture of femoral components 9 and 10 years after primary TKA. The Buechel-Pappas (BP) knee system used in our two cases were designed by the same team who designed the LCS TKA implants. The femoral component is made of cobalt chromium alloy. The break in the femoral component noted in both the cases were at a similar site, at the distal medial flange just posterior to the peg of the femoral component.
Result: Both these cases underwent revision surgery using stemmed implants with good results. Implants retrieved were analysed with Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) to study the fracture pattern and material properties respectively. Fractography analysis of both our cases showed that the crack initiated laterally from the thin edge (1mm) around the sharp angulated corner of the medial femoral condyle and spread medially towards the thicker segment.
Conclusion: We feel two fractures of femoral component out of 9000 TKA in ten years is significant. We recommend a re-evaluation of the femoral component of the BP knee system to ensure that the edges, specifically the sharp corners, have adequate thickness to avoid a fatigue fracture.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.knee.2020.06.009 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The qualitative analysis of trabecular architecture of the proximal femur based on the P45 sectional plastination technique.
J Anat
January 2025
Department of Orthopedics, Affiliated Zhongshan Hospital of Dalian University, Dalian, China.
The primary weight-bearing structure of the proximal femur, trabecular bone, has a complex three-dimensional architecture that was previously difficult to comprehensively display. This study examined the spatial architecture of trabecular struts in the coronal, sagittal, and horizontal sections of the proximal femur using 21 cases prepared with P45 sectional plasticization. The primary compressive strut (PCS) exhibited a "mushroom-like" shape with upper and lower parts.
View Article and Find Full Text PDFHow To Improve Patient Selection in Individuals With Lower Extremity Amputation Using a Bone-anchored Prosthesis.
Clin Orthop Relat Res
January 2025
Department of Rehabilitation, Radboud University Medical Center, Nijmegen, the Netherlands.
Background: Many patients with a lower limb socket-suspended prothesis experience socket-related problems, such as pain, chronic skin conditions, and mechanical problems, and as a result, health-related quality of life (HRQoL) is often negatively affected. A bone-anchored prosthesis can overcome these problems and improve HRQoL, but these prostheses have potential downsides as well. A valid and reliable tool to assess potential candidates for surgery concerning a favorable risk-benefit ratio between potential complications related to bone-anchored prostheses and improvements in HRQoL is not available yet.
View Article and Find Full Text PDFFar Cortical Locking Versus Standard Constructs for Locked Plate Fixation in the Treatment of Acute, Displaced Fractures of the Distal Femur: A Multicenter Randomized Trial.
J Bone Joint Surg Am
October 2024
Department of Orthopaedics, Faculty of Medicine, University of British Columbia, Vancouver, British Columbia, Canada.
Background: Fixation of distal femoral fractures remains a challenge, and nonunions are common with standard constructs. Far cortical locking (FCL) constructs have been purported to lead to improved fracture-healing as compared with that achieved with traditional locking bridge plates. We sought to test this hypothesis in a comparative effectiveness clinical trial.
View Article and Find Full Text PDFImpact of High Glucose on Bone Collagenous Matrix Composition, Structure, and Organization: An Integrative Analysis Using an Ex Vivo Model.
Cells
January 2025
Laboratory for Bone Metabolism and Regeneration, Faculty of Dental Medicine, University of Porto, 4200-393 Porto, Portugal.
Diabetes mellitus is a widespread metabolic disorder linked to numerous systemic complications, including adverse effects on skeletal health, such as increased bone fragility and fracture risk. Emerging evidence suggests that high glucose may disrupt the extracellular matrix (ECM) of bone, potentially altering its composition and organization. Collagen, the primary organic component of the ECM, is critical for maintaining structural integrity and biomechanical properties.
View Article and Find Full Text PDFConstraint of Different Knee Implant Designs Under Anterior-Posterior Shear Forces and Internal-External Rotation Moments in Human Cadaveric Knees.
Bioengineering (Basel)
January 2025
Research & Development, Aesculap AG, 78532 Tuttlingen, Germany.
Instability remains one of the most common indications for revision after total knee arthroplasty. To gain a better understanding of how an implant will perform in vivo and support surgeons in selecting the most appropriate implant design for an individual patient, it is crucial to evaluate the implant constraint within clinically relevant ligament and boundary conditions. Therefore, this study investigated the constraint of three different implant designs (symmetrical implants with and without a post-cam mechanism and an asymmetrical medial-stabilized implant) under anterior-posterior shear forces and internal-external rotation moments at different flexion angles in human cadaveric knees using a six-degrees-of-freedom joint motion simulator.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!