Synthesis and Characterization of a Multication Doped Mn Spinel, LiNiCuFeMnO, as 5 V Positive Electrode Material.

The suitability of multication doping to stabilize the disordered 3̅ structure in a spinel is reported here. In this work, LiNiCuFeMnO was synthesized via a sol-gel route at a calcination temperature of 850 °C. LiNiCuFeMnO is evaluated as positive electrode material in a voltage range between 3.5 and 5.3 V (vs Li/Li) with an initial specific discharge capacity of 126 mAh g at a rate of /2. This material shows good cycling stability with a capacity retention of 89% after 200 cycles and an excellent rate capability with the discharge capacity reaching 78 mAh g at a rate of 20. X-ray diffraction (XRD) measurements with a laboratory X-ray source between 3.5 and 5.3 V at a rate of /10 reveal that the (de)lithiation occurs via a solid-solution mechanism where a local variation of lithium content is observed. A simplified estimation based on the XRD analysis suggests that around 17-31 mAh g of discharge capacity in the first cycle is used for a reductive parasitic reaction, hindering a full lithiation of the positive electrode at the end of the first discharge.