Purpose: High-translucent dental zirconia has been introduced as a suitable material for anterior monolithic restorations. The material composition differs from traditional 3Y-TZP both with regard to yttria content and grain size. Little is known regarding how these alterations affect other properties than translucency and flexural strength. The aim of this study was to evaluate the crack propagation resistance and hardness of dental zirconias with different yttria content and different manufacturing methods.
Materials And Methods: Measurement of hardness (HV2/5) and crack propagation from the indents (damage tolerance) was performed using a hardness tester(Vicker) on a flat polished surface of five crowns from six different commercial dental zirconias; one hard-machined 3Y-TZP, three soft-machined 3-5% yttria-stabilized zirconias and two soft-machined zirconias with ≥5% yttria content.
Results: Damage control varied greatly among dental zirconias with different compositions and fabrication methods. The hard-machined 3Y-TZP had better crack propagation resistance than soft-machined, 3-5% yttria-stabilized zirconias.
Conslusion: The ultra-translucent zirconias with ≥5% yttria content had the lowest crack propagation resistance. Hardness is not a suitable indicator for damage tolerance.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7470024 | PMC |
| http://dx.doi.org/10.1080/26415275.2020.1809420 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Comparison of Internal, Marginal, and Incisal Gaps in Zirconia Laminates Fabricated Using Subtractive Manufacturing and 3D Printing Methods.
Biomimetics (Basel)
November 2024
Department of Dental Laboratory Science, College of Health Science, Catholic University of Pusan, 57 Oryundae-ro, Geumjeong-gu, Busan 46252, Republic of Korea.
DLP printing is a new method for producing zirconia laminates that ensure clinically acceptable gaps in the internal, marginal, and incisal regions. A typical model of a central maxillary incisor was prepped by a dentist and scanned. The laminate was designed using CAD software version 2023.
View Article and Find Full Text PDFFracture Resistance and Initial Penetration Time of a Novel Zirconia Crown Design for Simplifying Future Endodontic Treatment: An In Vitro Study.
Dent J (Basel)
November 2024
Department of Prosthetic Dental Science, College of Dentistry, Jazan University, Jazan 45142, Saudi Arabia.
: This study aimed to investigate the fracture strength of a novel-designed Zirconia crown before and after access opening, and to evaluate the mode of fracture and the time needed for initial penetration through the crown. : This study involved the design and testing of 60 zirconia crowns, divided into three groups (20 crowns each) to compare different structural designs. Group 1 (Control) used a conventional full zirconia crown.
View Article and Find Full Text PDFChanges in Occlusal Contacts upon the Cementation of Zirconia Crowns with Different Cement Spacers.
Dent J (Basel)
November 2024
Department of Restorative Dentistry and Biomaterials Sciences, Harvard School of Dental Medicine, Boston, MA 02115, USA.
Occlusion plays a crucial role in the long-term success and functionality of dental restorations. The purpose of this study was to investigate the changes in occlusal contacts upon the cementation of zirconia crowns with different cement spacer settings in computer-aided design and computer-aided manufacturing (CAD-CAM) software (3Shape Dental System version 2.102.
View Article and Find Full Text PDFMarginal Bone Loss Around the Implant: A Retrospective Analysis of Bone Remodeling Over Five Years of Follow-Up.
Cureus
December 2024
Regina Maria Dental Department, Regina Maria Private Healthcare Network, Bucharest, ROU.
Introduction: Bone remodeling around implants in implant-supported rehabilitation is a continuous debate with no consensus in the literature. This study aimed to investigate the implant- and patient-specific factors contributing to marginal bone loss near the implant.
Materials And Methods: We included patients who had implant-supported prosthetic rehabilitation using one implant system, between 2014 and 2018, who had full follow-up documentation and orthopantomography over five years, and who had no unwell-controlled systemic pathologies that may influence bone metabolism.
[Analysis of the effect and influencing factors of glass fiber post and zirconia all ceramic crown in repairing tooth defects].
Shanghai Kou Qiang Yi Xue
October 2024
Department of Stomatology, Shandong Provincial Chronic Disease Hospital (Shandong Rehabilitation Center). Qingdao 266000, China. E-mail:
Purpose: To analyze the repair effect of glass fiber post combined with zirconia all ceramic crown in tooth defects and explore the relevant factors affecting the therapeutic effect.
Methods: A total of 100 patients(142 teeth) with dental defects admitted to Shandong Provincial Chronic Disease Hospital from January 2018 to January 2021 were selected as the study subjects. They were divided into an experimental group (glass fiber post combined with zirconia all ceramic crown restoration) with 70 patients(98 teeth) and the control group (metal post combined with zirconium dioxide all ceramic crown) with 30 patients (44 teeth).
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!