We present the design of -on-Si waveguide photodetectors for the applications in the C- to U-bands. The GeSn photodetectors have been studied in respect to responsivity, dark current, and bandwidth, with light butt- or evanescent-coupled from an Si waveguide. With the introduction of 4.5% Sn into Ge, the GeSn waveguide PD with evanescent-coupling exhibits high responsivity of 1.25 A/W and 3 dB bandwidth of 123.1 GHz at 1.675 µm. Further increasing the Sn composition cannot improve the absorption in the U-band significantly but does lead to poorer thermal stability and higher dark current. This work suggests a promising avenue for future high-speed high-responsivity photodetection in the C- to U-bands.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/AO.398873 | DOI Listing |
Nanophotonics
April 2024
Université Paris-Saclay, Centre de Nanosciences et de Nanotechnologies, 91120 Palaiseau, France.
This study reports the experimental demonstration of the first waveguide-integrated SiGe modulator using a PIN diode operating in a wide spectral range of the mid-infrared region. At the wavelength of 10 µm, an extinction ratio up to 10 dB is obtained in injection regime and 3.2 dB in depletion regime.
View Article and Find Full Text PDFThis work presents two circuit-based solutions to enhance the power handling capabilities of waveguide-integrated uni-travelling carrier photodetectors (WG-UTC-PDs). Compared to a baseline WG-UTC-PD, these solutions achieve a fivefold increase in photocurrent before thermal breakdown. First, dual-injection improves the optical power distribution within a baseline WG-UTC-PD, raising the photocurrent threshold before thermal breakdown.
View Article and Find Full Text PDFWe proposed the improvement of near-infrared (NIR) sensitivity and response speed for surface-normal photodetector by coupling the surface plasmon (SP) mode excited at the plasmonic grating to the waveguide (WG) mode in the absorption layer. The thinner absorption layer accelerated response speed. The absorption efficiency in the InGaAs thickness of 300 nm was significantly improved to 51.
View Article and Find Full Text PDFNanoscale
December 2024
Department of Electronic Engineering, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong SAR, People's Republic of China.
The hybrid integration of two-dimensional (2D) materials on various photonic integration platforms has attracted widespread research interest because of the new functionalities enabled by the 2D materials for applications in photodetection, optical modulation and nonlinear optical signal processing. Tellurium is known to have high mobility, and quasi-2D tellurium is stable in air and has a small bandgap that may make it suitable for platform-independent scalable integration of high-performance photodetectors in the infrared band. In this work, we propose and implement a new structure for integrating tellurium with silicon nitride (SiN) waveguides, adding photodetector capability to an otherwise passive waveguide platform.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!