Microwave absorption (MA) materials with high heat resistance have a wide range of applications in many fields. In this work, a C,N-codoped MoSi ceramic was prepared via a facile solid-phase reaction method and its MA properties was investigated. On the one hand, the results indicate that this ceramic possesses excellent heat resistance and the weight of the MoSi is almost constant when the temperature is lower than 800°C. On the other hand, this ceramic shows good MA performance when the filler loading ratio increases to 30 vol%, the value of reflection loss (RL) could reach to -17.70 dB at 7.44 GHz with the thickness of 2.0 mm and the effective electromagnetic absorption bandwidth (RL below -10 dB) could reach to 1.88 GHz (9.28-11.16 GHz) with the thickness of 1.5 mm. Multi-polarization resonance loss is considered as the predominant attention mechanism on the MA performance of this MoSi ceramic. This research provides a new idea for understanding resonance mechanism and greatly expands the application scope of MoSi ceramic in MA area.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7428230 | PMC |
| http://dx.doi.org/10.1098/rsos.200740 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The Oxidation of ZrB/MoSi Ceramics in Dissociated Air: The Influence of the Elaboration Technique.
Materials (Basel)
August 2024
PROMES-CNRS, 7, Rue Du Four Solaire, 66120 Font-Romeu Odeillo, France.
Article Synopsis
- Researchers prepared ultra-high-temperature ZrB ceramics with 20 vol.% MoSi using cold isostatic pressing and robocasting, followed by spark plasma sintering to consolidate them.
- The oxidation behavior of these materials was tested in low-pressure air at temperatures of 1800, 2000, and 2200 K, revealing zirconia formation at all temperatures and silica only at 1800 K.
- Findings indicate that less dense ceramics are more prone to oxidation and suggest that the ceramics can withstand temperatures up to 2000 K, making them strong candidates for thermal protection applications.
Mechanically activated self-propagating high-temperature synthesis of titanium silicide-molybdenum disilicide composite using constituent elements.
Heliyon
July 2024
Advanced Materials Research Center, Department of Chemistry, School of Science, Xi'an Jiaotong-Liverpool University, Suzhou, 215123, China.
Silicides with potential to form a protective silica layer have garnered considerable attention as engineering ceramic materials. This research investigates the influence of initial composition and mechanical activation on the synthesis performance and microstructure of products in the Ti-Si-Mo system. Several compositions, including Ti8Mo29Si63, Ti15Mo25Si60, Ti22Mo22Si56, Ti40Mo12Si48, Ti52Mo6Si42, Ti62.
View Article and Find Full Text PDFHigh-Emissivity Double-Layer ZrB-Modified Coating on Flexible Aluminum Silicate Fiber Fabric with Enhanced Oxidation Resistance and Tensile Strength.
Materials (Basel)
July 2024
Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China.
Fibers crystallize and become brittle at high temperatures for a long time, so the surface coating must maintain long-lasting emission performance, which requires superior antioxidant properties of the high-emissivity fillers. To improve the radiation performance of the coating and the tensile strength of the fiber fabric, a double-layer coating with high emissivity was prepared on the surface of flexible aluminum silicate fiber fabric (ASFF) using MoSi and SiC as emissive agents. The incorporation of borosilicate glass into the outer coating during high-temperature oxidation of ZrB results in superior encapsulation of emitter particles, effectively filling the pores of the coating and significantly reducing the oxidation rate of MoSi and SiC.
View Article and Find Full Text PDFMicrostructure and Properties of Pressureless-Sintered Zirconium Carbide Ceramics with MoSi Addition.
Materials (Basel)
May 2024
Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
Zirconium carbide (ZrC) ceramics have a high melting point, low neutron absorption cross section, and excellent resistance to the impact of fission products and are considered to be one of the best candidate materials for fourth-generation nuclear energy systems. ZrC ceramics with a high relative density of 99.1% were successfully prepared via pressureless sintering using a small amount of MoSi as an additive.
View Article and Find Full Text PDFHigh Emissivity MoSi-SiC-AlO Coating on Rigid Insulation Tiles with Enhanced Thermal Protection Performance.
Materials (Basel)
December 2023
College of Science, Civil Aviation University of China, Tianjin 300300, China.
High emissivity coatings with sol as the binder have the advantages of room temperature curing, good thermal shock resistance, and high emissivity; however, only silica sol has been used in the current systems. In this study, aluminum sol was used as the binder for the first time, and MoSi and SiC were used as emittance agents to prepare a high emissivity MoSi-SiC-AlO coating on mullite insulation tiles. The evolution of structure and composition at 1000-1400 °C, the spectral emissivity from 200 nm to 25 μm, and the insulation performance were studied.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!