As drilling generates substantial bone thermomechanical damage due to inappropriate cutting tool selection, researchers have proposed various approaches to mitigate this problem. Among these, improving the drill bit design is one of the most feasible and economical solutions. The theory and applications in drill design have been progressing, and research has been published in various fields. However, pieces of information on drill design are dispersed, and no comprehensive review paper focusing on this topic. Systemizing this information is crucial and, therefore, the impetus of this review. Here, we review not only the state-of-the-art in drill bit designs-advances in surgical drill bit design-but also the influences of each drill bit geometries on bone damage. Also, this work provides future directions for this topic and guidelines for designing an improved surgical drill bit. The information in this paper would be useful as a one-stop document for clinicians, engineers, and researchers who require information related to the tool design in bone drilling surgery.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s10439-020-02600-2 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Influence of drilling incidence angle on the drilling force distribution of pneumatic impactor.
Sci Rep
January 2025
School of Mechanical and Electrical Engineering, Quzhou College of Technology, Quzhou, 324000, China.
Pneumatic impactor is widely used in the drilling process of various medium and high hard rocks with poor drill ability. Currently, there is relatively little analysis on the impact of the inclination of the rock surface during the drilling process on the drilling efficiency and excavation capability of pneumatic impactors. Based on the dynamic theory of impact drilling and finite element method (FEM), the constitutive model of HJC criterion and INVENTOR 3D mechanical structure design software, a 3D numerical analysis system of piston-bit head-rock during pneumatic impactor drilling is established by ANSYS LS-DYNA, a nonlinear dynamic analysis software.
View Article and Find Full Text PDFVat Photopolymerization Additive Manufacturing of WC-Co Hardmetals Enabled by In Situ Polymerization-Induced Microencapsulation.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China.
The additive manufacturing of hardmetals has attracted great attention recently but faces significant challenges in low printing resolution and low mechanical strength. Herein, the fabrication of hardmetal parts with complex structures and high surface quality by vat photopolymerization assisted with a sintering process has been achieved. This was enabled by in situ polymerization-induced microencapsulation of WC powder, which simultaneously enhances the photocuring ability and sedimentation stability of the WC-Co slurry.
View Article and Find Full Text PDFAssessment of the proficiency level of novices in distal intramedullary nail interlocking achieved through training with Digitally Enhanced Hands-on Surgical Training (DEHST).
Eur J Trauma Emerg Surg
January 2025
AO Research Institute Davos, Davos, Switzerland.
Background: Digitally Enhanced Hands-on Surgical Training (DEHST) platform was introduced to overcome the lack of training capabilities for the challenging task of freehand distal interlocking of intramedullary nails. It demonstrates high perceived realism for surgeons, and novices perform significantly better after DEHST training. However, characterization of how performance improves remained unexplored.
View Article and Find Full Text PDFEarly case series with placement of NeuroOne Evo stereoelectroencephalography depth electrodes and review of other Food and Drug Administration-approved products.
Surg Neurol Int
December 2024
Department of Neurosurgery, University of California, Irvine, Orange, United States.
Background: Stereoelectroencephalography (SEEG) is a common diagnostic surgical procedure for patients with medically refractory epilepsy. We aimed to describe our initial experience with the recently released NeuroOne Evo SEEG electrode product (Zimmer Biomet, Warsaw, IN) and review technical specifications for other currently approved depth SEEG electrodes.
Methods: We performed a record review on the first five patients implanted with NeuroOne Evo SEEG electrode product using the robotic stereotactic assistance robot platform and described our surgical technique in detail.
Predicting the Rate of Penetration while Horizontal Drilling through Unconventional Reservoirs Using Artificial Intelligence.
ACS Omega
December 2024
Department of Petroleum Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia.
Estimating the rate of penetration (ROP) is one of most critical tasks for evaluating the efficiency and profitability of drilling operation, which will aim in decision-making related to well planning, time estimation, cost estimation, bit selection, operational troubles, and logistics in drilling operation. The rise in unconventional resource development underscores the need for accurate ROP prediction to optimize drilling operations in these valuable reserves. ROP prediction and optimization in unconventional hydrocarbon reservoirs are challenging due to the formations' heterogeneity, high strength, and brittleness.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!