This study is to investigate the prevalence of work-related musculoskeletal disorders (MSDs) and the influencing factors among coal mine workers employed in on-site operations. The job burnout scale and MSD scale were implemented to investigate a random sample of 1,500 coal mine workers working in on-site operations in Xinjiang, China. In total, 1,325 valid questionnaires were collected, with a recovery rate of 88.33% (1,325/1,500). The rate of job burnout was 90%, of which 39.8% were categorized as mild burnout, 43.8% as moderate burnout, and 6.4% as severe burnout; the average job burnout score was 50.77 ± 11.93. The annual prevalence of MSDs was 65.6%, with the highest annual prevalence in the waist (50.7%), followed by the neck, shoulder, and knee, and the lowest prevalence in the elbow (18.8%). Of the areas of the body affected by work-related MSDs, the highest proportion of requests for leave of absence was related to the waist, accounting for 25.7% of requests, while the lowest proportion (13.4%) was related to the wrist. In addition, the incidence of MSDs increased with the years of service. The lowest incidence of MSDs was associated with the two-shift and three-group working pattern. The prevalence of MSDs in the neck and waist was higher in women than in men. The prevalence of MSDs in various body parts increased with the years of service. Moreover, multiple logistic regression indicated that three shifts with four groups (OR = 1.096, 95% CI: 0.832-1.445), working more than 10 years (OR = 3.396, 95% CI: 2.369-5.748), working more than 20 years (OR = 3.008, 95% CI: 1.419-6.337), significant bending (OR = 2.062, 95% CI: 1.400-3.038), forward neck tilting (OR = 1.572, 95% CI: 1.071-2.281), maximum force operation within a short period of time (OR = 1.7222, 95% CI: 1.164-2.547), repeated movement of upper arms or fingers (OR = 1.495, 95% CI: 1.034-2.161), slip or fall incidents (OR = 1.124, 95% CI: 1.039-1.216), work under conditions of cold or temperature variations (OR = 1.911, 95% CI: 1.342-2.720), mild burnout (OR = 1.492, 95% CI: 1.016-2.191), moderate burnout (OR = 1.852, 95% CI: 1.267-2.708), and severe burnout (OR = 2.001, 95% CI: 1.145-3.496) were risk factors for MSDs. In conclusion, there is a high annual prevalence of MSDs among the coal mine workers employed in on-site operations in Xinjiang, China. Measures to reduce this prevalence are required.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7436347 | PMC |
http://dx.doi.org/10.1155/2020/3164056 | DOI Listing |
Sci Rep
January 2025
College of Architecture and Transportation, Liaoning Technical University, Fuxin, 123000, China.
CO in coal mine underground spaces can easily cause casualties among miners. The humidity in coal mines is relatively high, and traditional Cu-Mn catalysts are prone to deactivation. Compared to traditional Cu-Mn catalysts, doping with Sn enhances the activity and water resistance of Cu-Mn catalysts.
View Article and Find Full Text PDFSci Rep
January 2025
College of Mining Engineering, Taiyuan University of Technology, Taiyuan, 030024, Shanxi Province, China.
The influence of interface morphology is of great importance on the shear behavior of the cement mortar-coal composite structure (CCCS) widely distributed in underground mines. In the present research, both the macroscopic- and microscopic failure characteristics of the CCCS with variable interface sawtooth angles (i.e.
View Article and Find Full Text PDFSci Rep
January 2025
Shandong Key Laboratory of Mining Disaster Prevention and Control, Shandong University of Science and Technology, Qingdao, 266590, China.
Owing to the differences in sedimentary environments in the mining areas of western China, the mechanical properties of rocks in this region are significantly different from those in the central and eastern regions. Therefore, uniaxial cyclic loading-unloading tests were conducted on fine sandstone found in many roof rocks to study the evolution laws of mechanical properties, deformation characteristics, acoustic emission (AE) parameters, and energy under cyclic loading and unloading conditions. The accumulated residual strain, dissipative energy, acoustic emission cumulative ringing counts, and cumulative energy were introduced to characterize the degree of rock damage.
View Article and Find Full Text PDFSci Rep
January 2025
School of Mechanical and Engineering, Liaoning Technical University, Fuxin, 123000, China.
As the depth of coal mining in China continues to increase, the fracturing of coal rock masses has an increasingly complex impact on the surrounding rock roadways. The majority of the mine's roadways run through coal rock masses with hard roofs and soft bottoms, which typically exhibit complex dynamic behaviour. To further research the mechanical behaviour and fracture evolution of coal rock masses under hard-roof and soft-floor conditions, the study is based on the majority of working faces in a mine, which have hard roofs and soft floors.
View Article and Find Full Text PDFSci Total Environ
January 2025
College of Ecology and Environment, Joint Center for sustainable Forestry in Southern China, Nanjing Forestry University, Nanjing 210037, China; Yale-NUIST Center on Atmospheric Environment, Collaborative Innovation Center on Forecast and Evaluation of Meteorological Disasters (CIC-FEMD), Nanjing University of Information Science & Technology, Nanjing 210044, China. Electronic address:
Methane (CH) emissions from the coal industry represent a substantial portion of anthropogenic CH emissions from energy-related activities. China ranks as the world's largest coal producer, where Shanxi Province is one of its major coal production regions and accounts for 20.7 % of the national total coal production.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!