Asbestos-containing pottery shards collected in the northeast of Corsica (Cap Corse) and dating from the 19th century, or earlier, have been analyzed by SEM-EDS, XRPD, FTIR and Raman microspectroscopy. Blue (crocidolite) and white (chrysotile) asbestos fiber bundles are observed in cross-sections. Most of the asbestos is partly or totally dehydroxylated, and some transformation to forsterite is observed to occur, indicative of a firing above 800 °C. Examination of freshly fractured pieces shows a nonbrittle fracture with fiber pull-out, consistent with a composite material behavior, which makes these ceramics the oldest fiber-reinforced ceramic matrix composite. Residues indicate the use of this pottery as a crucible for gold extraction using cyanide.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7476015 | PMC |
| http://dx.doi.org/10.3390/ma13163597 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Finite element investigation for improving chest wall reconstruction process using ceramic and polymeric implants.
Sci Rep
January 2025
Biomedical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt.
Car accidents, infections caused by bacteria or viruses, metastatic lesions, tumors, and malignancies are the most frequent causes of chest wall damage, leading to the removal of the affected area. After excision, artificial bone or synthetic materials are used in chest wall reconstruction to restore the skeletal structure of the chest. Chest implants have traditionally been made from metallic materials like titanium alloys due to their biocompatibility and durability.
View Article and Find Full Text PDFEffects of Temperature and Water Vapor Content on Microstructure, Mechanical Properties and Corrosion Behavior of C/C-SiC Composites.
Materials (Basel)
December 2024
Aerospace Research Institute of Materials and Processing Technology, Beijing 100076, China.
Carbon-fiber-reinforced carbon and silicon carbide (C/C-SiC) composites were prepared using chemical vapor infiltration (CVI) combined with reactive melt infiltration (RMI). The microstructure and flexural properties of C/C-SiC composites after oxidation in different temperature water vapor environments were studied. The results indicate that the difficulty of oxidation in water vapor can be ranked from easy to difficult in the following order: carbon fiber (CF), pyrolytic carbon (PyC), and ceramic phase.
View Article and Find Full Text PDFStudy on the Effect of Temperature and Pressure Environments on the Mechanical and Electronic Properties of Titanium Carbon Nitride Ceramics.
ACS Appl Mater Interfaces
January 2025
Institute of Atomic and Molecular Physics, Sichuan University, Chengdu 610065, China.
As a high-performance cermet, TiCN possesses extensive potential for application in various fields, including coating materials, ceramic products, and electronic materials. Here, the effects of temperature and pressure on the physical properties of the TiCN cermet have been investigated by high-pressure techniques and first-principles calculations. Experimentally, the phase, microstructure, mechanical properties, and electrical conductivity of bulk TiCN ceramics were analyzed.
View Article and Find Full Text PDFMargin quality, homogeneity, and internal porosity assessment of experimental short fiber-reinforced CAD/CAM composite.
J Mech Behav Biomed Mater
December 2024
Department of Biomaterials Science and Turku Clinical Biomaterial Center -TCBC, Institute of Dentistry, University of Turku, Finland; Research Development and Production Department, Stick Tech Ltd-Member of GC Group, Turku, Finland.
Objectives: The aim of this study was to evaluate the margin quality of anterior crowns made of experimental short fiber-reinforced CAD/CAM composite (SFRC CAD) block before and after cyclic fatigue aging. Moreover, to investigate the microstructure, homogeneity, and porosity of the SFRC CAD compared with other commercial CAD/CAM materials.
Methods: 40 anterior crowns were milled from five CAD/CAM blocks divided into five groups (n = 8/group).
High-Performance Advanced Composites in Multifunctional Material Design: State of the Art, Challenges, and Future Directions.
Materials (Basel)
December 2024
Department of Metallurgical and Materials Engineering, Faculty of Engineering, University of Porto, Rua Doutor Roberto Frias, 4200-465 Porto, Portugal.
This review examines high-performance advanced composites (HPACs) for lightweight, high-strength, and multi-functional applications. Fiber-reinforced composites, particularly those utilizing carbon, glass, aramid, and nanofibers, are highlighted for their exceptional mechanical, thermal, and environmental properties. These materials enable diverse applications, including in the aerospace, automotive, energy, and defense sectors.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!