Platinum is a promising candidate for the realization of blocking electrical contacts on cadmium-zinc-telluride (CdZnTe or CZT) radiation detectors. However, the poor mechanical adhesion of this metal often shortens the lifetime of the final device. In this work, a simple and effective procedure to obtain robust platinum contacts by electroless deposition is presented. Microscopical analysis revealed the final thickness and composition of the contact layer and its adhesion to the bulk crystal. The blocking nature of the Pt-CdZnTe junction, essential to obtain low noise devices, was confirmed by current-voltage measurements. The planar Pt-CdZnTe-Pt detectors showed good room temperature spectroscopic performance with energy resolution of 4% (2.4 keV) and 3% (3.7 keV) FWHM at 59.5 and 122.1 keV, respectively. Finally, we showed, for the first time, that platinum contacts allow the estimation of the carrier lifetime and mobility of both holes and electrons by using current transient measurements. This demonstrated the optimal hole extraction capability of such contacts.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7426932 | PMC |
| http://dx.doi.org/10.1038/s41598-020-70801-9 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Flexible disk ultramicroelectrode: Facile preparation and high-resolution scanning electrochemical microscopy imaging.
Anal Chim Acta
January 2025
State Key Laboratory of Electroanalytical Chemistry, Jilin Province Key Laboratory of Low Carbon Chemical Power, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, 130022, Jilin, China; School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei, 230026, Anhui, China. Electronic address:
Background: Scanning electrochemical microscopy (SECM) is a kind of scanning probe technology that enables the obtainment of surface morphology and electrochemical information by recording changes in Faraday current triggered by the movement of probe.
Results: In this work, flexible disk ultramicroelectrode (UME) with highly repeatable geometry are fabricated through a simple and universal strategy that involves vacuum pulling the glass capillaries inserted with platinum wire (gold wire, carbon fiber, etc.), followed by a rapidly heated sealing and polishing process.
Introduction: Niraparib was approved for first-line (1L) maintenance (1LM) treatment of patients with advanced epithelial ovarian cancer (EOC) following the PRIMA/ENGOT-OV26/GOG-3012 (PRIMA) trial. PRIMA was restricted to patients at higher risk of progression (excluded stage III EOC with no visible residual disease [NVRD] after primary cytoreductive surgery [PCS]). This retrospective study evaluated the potential impact of excluding stage III EOC with NVRD from PRIMA by assessing real-world treatment outcomes following 1LM niraparib monotherapy in this patient population.
View Article and Find Full Text PDFReal-world Effectiveness of Single-Agent Enfortumab Vedotin in Patients With Advanced Urothelial Carcinoma.
Clin Genitourin Cancer
December 2024
Division of Medical Oncology, Department of Internal Medicine, Huntsman Cancer Institute, University of Utah, Salt Lake City, UT. Electronic address:
Background: Enfortumab vedotin (EV) is a nectin-4-directed antibody and microtubule inhibitor conjugate indicated for patients with metastatic urothelial carcinoma (mUC) who have received prior platinum-based chemotherapy and PD-1/L1 inhibitors or are ineligible for cisplatin-containing regimens and have undergone at least 1 prior line of therapy. EV is also indicated in combination with pembrolizumab in the first-line setting. However, real-world effectiveness of EV based on treatment line and impact of prior therapy remains unclear.
View Article and Find Full Text PDFVaporized hydrogen peroxide uptake by tubing used for aseptic Fill-Finish manufacturing of biopharmaceutical drug products.
Eur J Pharm Biopharm
December 2024
ten23 health AG, Mattenstr. 22, 4058 Basel, Switzerland; Institute of Pharmaceutical Sciences, Department of Pharmaceutics, University of Freiburg, Sonnenstr. 5, 79104 Freiburg, Germany. Electronic address:
Aseptic filling of biopharmaceutical products requires a grade A cleanroom environment, preferably ensured by isolators in grade C surroundings. Isolators are decontaminated before the start of filling processes using vaporized hydrogen peroxide (VHP) and filling starts at pre-defined residual VHP levels (e.g.
View Article and Find Full Text PDFNonequilibrium-corrosive engineering synthesis of Pt anchored on FeO with oxygen vacancy for efficient electrocatalytic hydrogen evolution reaction.
J Colloid Interface Sci
December 2024
Key Laboratory of Eco-chemical Engineering, Ministry of Education, International Science and Technology Cooperation Base of Eco-chemical Engineering and Green Manufacturing, College of Chemistry and Molecular Engineering, Qingdao University of Science & Technology, 53 Zhengzhou Road, 266042 Qingdao, PR China. Electronic address:
The development of suitable support to maximize the atomic utilization efficiency of platinum is of great significance for the hydrogen evolution reaction (HER). Herein, we report a simple and fast nonequilibrium-corrosive approach to prepare oxygen defect-enriched FeO decorated with trace Pt onto nickel-iron foam (Pt/FeO-O/NIF). The Pt/FeO-O/NIF electrode is superhydrophilic with intimate contact with the electrolyte.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!