In this paper, a novel dynamic Vision-Based Measurement method is proposed to measure contact force independent of the object sizes. A neuromorphic camera (Dynamic Vision Sensor) is utilizused to observe intensity changes within the silicone membrane where the object is in contact. Three deep Long Short-Term Memory neural networks combined with convolutional layers are developed and implemented to estimate the contact force from intensity changes over time. Thirty-five experiments are conducted using three objects with different sizes to validate the proposed approach. We demonstrate that the networks with memory gates are robust against variable contact sizes as the networks learn object sizes in the early stage of a grasp. Moreover, spatial and temporal features enable the sensor to estimate the contact force every 10 ms accurately. The results are promising with Mean Squared Error of less than 0.1 N for grasping and holding contact force using leave-one-out cross-validation method.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7472272 | PMC |
http://dx.doi.org/10.3390/s20164469 | DOI Listing |
Micromachines (Basel)
December 2024
School of Aerospace Science and Technology, Xidian University, Xi'an 710071, China.
Robotic devices with integrated tactile sensors can accurately perceive the contact force, pressure, sliding, and other tactile information, and they have been widely used in various fields, including human-robot interaction, dexterous manipulation, and object recognition. To address the challenges associated with the initial value drift, and to improve the durability and accuracy of the tactile detection for a robotic dexterous hand, in this study, a flexible tactile sensor is designed with high repeatability by introducing a supporting layer for pre-separation. The proposed tactile sensor has a detection range of 0-5 N with a resolution of 0.
View Article and Find Full Text PDFMicromachines (Basel)
December 2024
Department of Mechanical Engineering, Brigham Young University, 350 Engineering Building, Provo, UT 84602, USA.
Recent advancements in Electrowetting on Dielectric (EWOD) systems, such as simplified fabrication, low-voltage actuation, and the development of more reliable materials, are expanding the potential applications of electrowetting actuators. One application of EWOD actuators is in RF devices to enable dynamic reconfiguration and allow real-time adjustments to frequency and bandwidth. In this paper, a method is introduced to actuate a panel using EWOD forces.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Laboratoire de Tribologie et Dynamique des Systemes (LTDS), Ecole Centrale de Lyon, Centre National de la Recherche Scientifique, 69134 Lyon, France.
This work investigates the contact between abrasive particles and workpieces in microfinishing processes with special consideration given to the determination of unit force, unit pressure, and grain, the forces exerted by individual abrasive grains. A detailed methodology was established for measuring the contact area, penetration depth, and circumferences of grain imprints at depths corresponding to multiples of the total height of the abrasive film, represented by the parameter . The following depths were analyzed: 0.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Institute of Optoelectronics, Military University of Technology, gen. S. Kaliskiego 2, 00-908 Warsaw, Poland.
In order to improve the performance of cement mortar (Portland cement), it was enriched with triclosan, hypochlorous acid, silver nanoparticles and graphene oxide. Cement mortar is used, among other things, to fill the gaps between the tiles of building porcelain stoneware. A number of structural, mechanical and biological tests were carried out.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Faculty of Science and Technology, Norwegian University of Life Sciences, Drøbakveien 31, 1430 Ås, Norway.
The interaction of Ni with (6,0) and (8,0) zigzag carbon nanotube exterior surfaces containing two vacancies was studied using density functional theory (DFT). A two-vacancy defect was analysed in order to anchor Ni, and the pristine nanotube was also considered as a reference for each chirality. The adsorbed Ni stability and the nanotube's geometry and electronic structure were analysed before and after the adsorption.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!